How To Build A Timber Boat From Scratch {awesome|amazing|Great|Special}

The only natural material for building boats is wood. There are various designs in the art of wooden boat building. The techniques for building wooden boats depends on the type of boat, the technique and procedure for making day sailors is different from the one used for construction of powerboats, cruising boats, or performance rows among several others.

Likewise, depending on the type of boat you want to build, you have an option of choosing from a large variety of timbers.

Since wood is known to retain moisture which encourages growth of fungal spores and eventual decay, you need to protect the timber you will use to put your boat together with coatings and quality preservatives.

Different types of trees produce varying qualities of timber. It is therefore important to understand the options before picking any type of timber for construction of your boat.


This type of wood is ideal for construction of a boat intended for use at sea.

You don’t have to worry too much about protecting it with preservatives, the sea water will effectively perform that task.

However, fresh water will rot it away if is not properly protected. So if you intend to sail it on fresh water, apply preservative and coating to the timber.

If you can get sea water, wash the wood in it.


They take long growth time, slowly tightening their grains. They are therefore known for their strength and length.

Owing to these qualities, they are the most commonly used type of timber in wooden boat building.

Teak and Iroko

They don’t wear out easily because they contain silica. Moreover, they are not affected by rot and decay.

These characteristics entice boat makers into including them in most of their boat plans.


They are mainly used for construction of spars, masts, oars, rubbing stakes and planked hulls.

This is because their grain is long and straight. It is also more widely spaced since they have a faster growth than that of hardwood.

How To Build A Timber Boat: Simple Steps to Follow

One of the most important things to remember before beginning to build a timber boat is that the number of ribs determines the length of the boat.

Therefore, the more ribs your boat has, the longer it is. The less the ribs you fit to it, the shorter it will be.

To get the ribs, first steam straight spruce stock. Then bend and laminate them.

Place them in a jig and pull them so that they take the shape of the boat-making mould. Finally leave them to dry.

After they are dry, remove the ribs and put epoxy between the ribs, then wrap everything in plastic. This prevents it from sticking.

To enable the setting of the epoxy, put the ribs back in the mould and hold them tight with clamps.

Screw the ribs to the bottom-board and fit a stretcher assembly inside the boat as well as below the boat. This is done by clamping and then screwing in order to keep the ribs in place.

Remember, this is temporary since you’ll not need the stretcher after the strips are put in place.

Attach a laminated stem to every side of the boat and fit the first strip and keep fitting more until the hull is completely planked.

When the boat is planked, scrape and sand it until you are satisfied that the job is properly done. Then fill the screw holds and sand more.

Dry-fit a fiber-glass cloth to one side of the boat and apply epoxy from the middle towards the ends. Perform the same procedure with the other side.

Fit the end of the boats with the cloth after cutting it.

The fiberglass cloth is now stuck to the hull on your boats exterior. When dry, repeat the scraping and sanding procedure.

Then apply another two coats of epoxy, filling the fiberglass cloth weaves.

Since you are now done with your boats exterior, it’s time to do some sanding on the interior.

Fit the seats and seat risers when sufficient sanding is done. Then remove them and apply epoxy. This time you can leave out fiberglass cloth.

Apply 3 coats of spar varnish. Remember to ensure that the epoxy has cured well. Additionally, ensure that there is no dust.


Your boat plans have now been put into practice and you are ready to set sail. Remember, wooden boat building will take you approximately 2 months.

Keeping your boat floated on sea water is better than leaving it fresh water. If you are storing the boat on your yard, keep it above ground and cover it to prevent damage from bad weather and allow air circulation.

Source by David Ansley

Chest Woodworking Plans – A Guide to Choosing Your Woodworking Project Plans {awesome|amazing|Great|Special}

You don’t have to be a kid to appreciate wooden chests. Wooden chests are fun pieces of furniture, and building them is even more enjoyable. In fact, chest woodworking projects are an excellent way to start your woodworking hobby. They are fairly easy to construct and they do not require a lot of materials. Your creativity an also go full swing as you are not restricted to particular schemes or styles when it comes to chest woodworking You can try your hand on creating a wacky pirate treasure box or an ‘antique’ cherry chest.

However, chest woodworking projects still vary in complexity so make sure you choose one appropriate to your skill level. Good woodworking plans usually state the level of difficulty and that’s the first thing you should take a look at. Here’s more:

Design Notes

The beauty of a chest woodworking project is that you get to play around with the design. It would be fun to choose ornamental hinges and front clasps. Handles would also be a good addition as it will make it easy to move the chest around when needed. A good woodworking plan should include suggestions on ornamental additions, finishing and general design patterns, if any.

Bill of Materials

Materials for chest woodworking vary greatly. You can make one out of plywood, pine, cedar or cherry. Just make sure there is a detailed cutting list. Another point is that some wooden chests are constructed without nailing the boards or pieces of wood. Some woodworkers prefer wood glue. But there are instances when you cannot do away with screwing the pieces together. Good chest woodworking plans have detailed lists of materials.

The Control Mechanism Feature

Wooden chests have two major parts; the base and the lid. A good woodworking plan would involve instructions on installing a control mechanism, like a simple chain inside the chest to prevent the lid from swinging too far out and causing damage to the hinges.

The Instructions

Dovetail joints, biscuit joints, tongue and grove – these might be things an expert woodworker can accomplish without a sweat. But not everyone could. Good chest woodworking plans do not necessarily have to initiate you to woodworking jargon (you should learn them eventually, if you are a true-blue woodworking enthusiast); instead they should be clear and should provide step by step instructions.

Since these storage units are easy to construct, you won’t find yourself in a lot of frustrating moments that is often the case with more complicated projects like dining tables and outhouses. What better way to boost your woodworking skills than by working on something you can actually finish, and enjoy while doing so.

Source by Jim Goodman