English Saddle Parts Definitions and Functions {awesome|amazing|Great|Special}

Have you ever wondered what to call a part of your Horse’s saddle or what function it serves? This article will provide you with easy to understand highlights of the parts of an English Saddle from the pommel to the cantle and everything in between sorted alphabetically. The bullet points below each item provides a high level summary pertaining to that item.

Bars

  • The part of the saddle tree that run horizontally along the horse’s back

Billets

  • Straps used to attach the Girth (also called Girth Straps)
  • Attached to the saddle tree webbing under the saddle flaps
  • There are generally three billet straps per saddle allowing for backups in the event of wear and tear.
  • Each strap has multiple holes to allow for tightening of the Girth
  • Billet straps can be long or short
  • Long straps attach to the girth below the saddle flap and decrease the bulk under the rider’s leg.

Cantle

  • The raised back section of the saddle seat that connects the bars of the saddle tree
  • Provides security for the rider

Channel

  • The gap between the panels on the underside of the saddle

D-rings

  • “D shaped” metal rings that are attached with panel hide to the saddle tree toward the front of the saddle
  • D-rings enable the rider to attach additional equipment to the saddle
  • D-rings should not be used to attach breastplates as they tend to be weak

Gullet

  • The open area between the panels that runs from the pommel to the cantle on the underside of the saddle
  • Ensures there will be no pressure from the saddle or rider on the horse’s spine

Iron

  • The stainless steel part of a stirrup where the rider’s foot rests

Panels

  • Each saddle has two panels.
  • The panels are attached to the saddle tree and run horizontal along both side of the horse’s spine.
  • Panels provide cushioning for the horse’s back and allow the weight of the rider to be more evenly distributed.
  • Panels are usually filled with wool, foam flocking or are sealed air pockets.

Pommel

  • The raised portion in the front of the saddle that provides clearance for the horse’s wither – also known as the head

Saddle Flap

  • The large section of leather on both sides of the saddle
  • The size and angle of the flaps are determined by the intended use of the saddle and the rider’s leg position (i.e. The flaps of a jumper saddle are more forward-cut than a dressage saddle to allow for shorter stirrups)

Seat

  • The lowest part of the top of the saddle where the rider sits

Skirt

  • The small pieces of leather near the front on both sides of the saddle that goes over the stirrup bar
  • Prevents the rider’s leg from rubbing on the buckle of the leather strap that connects the stirrups

Staples

  • Metal rings that are attached securely to the saddle tree toward the front of the saddle.
  • Staples are much stronger than D-rings and are used to attach items to the saddle such as breastplates

Stirrups

  • Stirrups are where a rider places their feet while riding
  • The stirrups are attached to the saddle with leather stirrup straps
  • The stirrups provides the rider with more security and control while riding

Stirrup Bar

  • Stirrup bars are attached to the tree of the saddle under the saddle skirt.
  • The stirrup straps connect to the stirrup bars

Stirrup Leather Keeper

  • A loop (similar to a belt loop) or slot that is added to the saddle flap to hold the end of the leather stirrup strap to keep it secured.

Sweat Flap

  • Large flaps on the underside of the saddle that fits between the horse and the billets
  • Prevents the horse from being pinched by the buckles and girth
  • Protects the outer part of the saddle from the sweat of the horse

Tree

  • The frame of the saddle
  • Traditional saddle trees are made of quality wood
  • Modern day trees may be made of wood or synthetic materials such as polyurethane or fiberglass
  • Some saddle trees are made with spring steel that runs from front to back between the bars. The spring steel provides the tree additional flexibility and is appropriately named a “spring tree”

Twist

  • The narrow part between the welts on the front of the seat

The design and materials of saddles vary greatly. A properly fitted, quality saddle is essential to ensure a happy healthy horse and your satisfaction. Enjoy the ride!



Source by Beverly Fox

Importance of Metal Fence Panels {awesome|amazing|Great|Special}

Whether you need fencing for your garden or your patio, there are various types of fencing panels to choose from. They serve a variety of purposes as well. The most important advantage of having fencing panels around your yard is security. Apart from security, they can be decorative and ornamental as well. The best type of fencing can be provided with the metal fence panels. They are available in different patterns, styles and textures.

Most of the metal fence panels are made of different metals like aluminum, steel or wrought iron. Another popular style of this is the chain link panels which provide maximum security without being much decorative. It requires only minimum maintenance. Since the metal panels are always exposed to all kinds of weather, they usually have a coating to prevent rust and other damages.

Chain link fences make use of rubber coating. This coating is available in different colors which are good for camouflage. The most durable of these panels is the wrought iron panels. Though they are expensive they look very attractive and impart a decorative aspect to the whole structure. While installing wrought iron panels you will also have additional expenses on labor etc.

The most inexpensive panels to use is the chain link. It lasts long as well. Another popular type of panels used is made of steel. You can find it in different kinds of patterns and shapes. The biggest advantages of using metal panels are their added security, customizable shapes and patterns and durability. You can find these at both the local stores and online.

While choosing these metal fence panels you need to check the climate of the locality because this will affect the kind of panels you are going to use. Sometimes, you may also need to check with the homeowners association to see if they have any rules regarding the usage of these panels which could affect the neighbors.



Source by Xuesong Wang

Planning Permission Tips UK – Free Design Advice In The UK – How And Where To Get It {awesome|amazing|Great|Special}

Isn’t it funny how people shelve projects for the new year – perhaps the new year feels like a fresh canvas or something – I don’t know. Many potential clients I saw in Q4 of last year our now coming through as confirmed commissions – it’s a funny old world with no rhyme or reason…

Providing advice to these potential clients is always a dilemma. On the one hand you want to be helpful & prove your metal in order to gain their trust but on the other hand you are also giving away the family silver without any prior commitment from them that they will actually be engaging your services. Ideas & suggestions on how to achieve a clients building objective is often all we have to offer. Sure there is the technical & craftsmanship element of your service but that’s often taken for granted. The creative element is often the bit that actually makes a good development work.

Fortunately, residential development isn’t exactly within the realms of Richard Rogers stature especially when developing an existing dwelling with well needed extensions.

So, where does the ordinary householder obtain good independent advice when they are considering an extension to their home? And, is this advice worthy when offered for free? Finally, who do they select as their final design Agent if they lack the necessary skills in producing the design onto paper?

Firstly, There are loads of ways to obtain design free advice. The first step is to consider worked examples already constructed within your street or local area. Be critical & analytical. Decide what works & is pleasing on the eye & what doesn’t. Decide what details can you transfer over to your own scheme.

Secondly, go to your council or research a few other councils web sites & download their readily available design guides especially if your property is within a conservation or sensitive rural area. Most councils now have quite good design guides amongst their simplistic do’s & don’t’s pamphlets. Read these design guides and do take on board their messages.

Thirdly (and after completing steps 1 & 2 above) invite a few professionals to come & take a look at your property with a view to perhaps engaging one of them.

These ‘professionals’ range in terms from Chartered Architects, Architectural Technicians, Surveyors & other Designers of various stature & background. I wont promote any one over another but a lot will depend upon what type of overall service you may be looking for & how much of your potential build budget you are happy to hive off in fees.

However, as a guide, the one to stay well away from is your ‘kitchen table top’ designer – you know the sort, pencil tracings at the weekends while he works for the Gas Board during the day. Bargain basement prices they may be but they will have little interest in ensuring a pleasing design is accomplished at the end.

Most professional building designers still don’t charge for their time at the initial site visit which is a shame in my view as this tends to instantly sort out the serious from the tire kickers. Invite 2 or 3 round for their opinions & gauge their reactions & comments. You will be amazed at the varying attitudes you will encounter. Hopefully all of your invited professionals will have been sourced from recommendations. If not then you have a little research to do.

In order to get the best advice out of these people it is important that you are clear on your objectives. It has been my experience that most homeowners do actually know what they want from their homes. Temper that with a degree of flexibility & an enquiring mind that will allow the building designer to input some of his/her own thoughts from their initial first impressions of what they see. As with everything else in life, there are always options to be explored – the obvious well trodden path through a wood main not be the prettiest.

Now test the designers metal by throwing in an obvious ‘no-no’. For example….talk about your idea for an extensive flat roof or an obvious overlooking side window. If he/she simply panders to your thoughts on these points then you know the advice is dubious. Conversely, if the Building Designer is not listening to your principal requirements & shooting off all manner of other design concepts or projects then you also know that you wont end up with a building that satisfies your main needs or budget.

Somewhere between the two is what you are seeking. Someone who can clearly latch on to achieving your space requirements but who is not afraid to question or challenge your preferred siting, materials or layout in order to gain a better overall external appearance & internal design solution.

You will probably discover that you will actually need a building designer to carefully present your scheme through Planning & for the detailed design & specification build up later on so the exercise was worthwhile. For those with rudimentary drawing skills & a passion for ‘doing it themselves’ they will also find the exercise worth while.

No matter which route you take, time invested in these three simple but often time consuming steps stated above is usually an invaluable part of obtaining a well considered final design for your residential development. Those that ‘crash in’ without seeking prior advice or without completing a little research will often have regrets either in an awkward looking development that they are having trouble selling or incurring abortive fees from having the scheme refused at Planning.



Source by Martin Meaks