Skip to content

Kitchen Inspiration

Best Web For Your Kitchen Idea and Inspiration

  • Home
  • About
  • Contact
  • Cookie Policy
  • Copyright
  • Privacy
  • Sitemap
  • Terms
  • Kurma Ruthob Aisha Nikmat
  • Parfum Rawdha Kasturi

California

Sunday hits San Francisco

October 19, 2020 by 4g3nd4

Blogged in The Woodwork: Faking Long Exposure.
Use for my PHP Advent 2008: PHP without PHP.
Blogged in The Woodwork: PHP without PHP.

Sunday hits San Francisco
Treasure Island, San Francisco, California

Nikon D3, Nikkor 14-24mm f/2.8G, Gitzo G1228LVL tripod, Really Right Stuff BH-55 ballhead, Really Right Stuff PCL-II panoramic clamp
Aperture 2.0 (raw fine tuning, straighten) nik Color Efex Pro (graduated neutral density, polarization, pro contrast, contrast color range, brilliance/warmth) Photoshop (merge, heal)
2 exposures, 10 multi-exposures, 1/100sec @ f/18, iso200, 14mm (14mm)

____________________________________________________

Sunrise at Treasure Island

The weather was miserable on Saturday but on the off chance that it would clear up before sunrise, I drove down to Treasure Island and tried my hand at outdoor photography in over a year. For me, setting up in the pre-dawn for a photograph at sunrise is chicken soup for the soul.

The sun only broke through for a few minutes, but it was enough to take this photograph. By the time I jockeyed my camera for a satisfactory angle, I found out I was setting up in the water!

Since this lens cannot mount a ND filter, I stopped down as much as possible (f/22), set the ISO as low as possible (LO -1EV) and then took 10 exposures averaged in camera (multi-exposure mode), to emulate what a ND 1.2 would have done at f/16.

There is a small cheat here. In order to capture most of the sky and the horizon the way I wanted, I had to swipe part of the rocks in the foreground from a different (but identically set) exposure, technically this makes this a vertical panorama, but since the merge point is in the (multi-exposure integrated) water, I just blended them and avoided anything fancy.

There was an insane amount of dust on the senor and lens element. Because of this, I had to use the heal tool liberally. A digital grade ND brought back the rocks in the foreground and allowed the sky to be saturated and still hold contrast. The rest of the postprocessing was done to give it that postcard look and then toned back a small bit. u-points were used to keep the rock out of shadow and the buildings in North Beach (the only thing in direct reflected sunlight) from being totally blown out.

Click for original photograph (If you cannot view this, add me to your contacts and I’ll add you to my friends. If you are already a contact of mine then just jet me a message and I’ll fix your status.)

Posted by tychay on 2008-04-03 06:14:54

Tagged: , heal , Bay Area , digital graduated nd , equipment , descriptive places , camera , digital polarization , places , skyline , stock categories , California , tripod , outdoor , Nikkor , Apple Aperture , San Francisco , TransAmerica building , 14-24mm f/2.8G , digital brilliance/warmth , Northern California , image type , skyscraper , building , digital color contrast range , Nikon D3 , Treasure Island , camera accessories , bay , Photoshop , digital pro contrast , portrait orientation , multiple exposure , Bay Bridge , architecture , RRS BH-55 ballhead , post-processing , city , bridge , waterblur , nik Color Efex Pro , seashore , orientation , time , reflection , RRS PC-II pano-clamp , Gitzo G1228LVL , straighten adjustment , shooting traits , Apple Aperture 2.0 , United States , Really Right Stuff , clouds , water , morning , lens , photo specs , stitch , sky

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 14-24mm f/2.8G, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, Apple Aperture, Apple Aperture 2.0, Architecture, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Bay, Bay Area, Bay Bridge, bridge, Building, California, Camera, camera accessories, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, city, Clouds, descriptive places, digital brilliance/warmth, digital color contrast range, digital graduated nd, digital polarization, digital pro contrast, Equipment, for woodworking crafts, for woodworking tool, Francisco, Gitzo G1228LVL, guide to woodworking, heal, hits, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, image type, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Lens, Morning, multiple exposure, nik Color Efex Pro, nikkor, Nikon D3, nk woodworking bathtub, Northern California, oil can woodworking, orientation, outdoor, photo specs, photoshop, Places, portrait orientation, post-processing, Really Right Stuff, reflection, RRS BH-55 ballhead, RRS PC-II pano-clamp, San, San Francisco, seashore, shooting traits, sky, skyline, skyscraper, stitch, stock categories, straighten adjustment, Sunday, Time, TransAmerica building, Treasure Island, Tripod, United States, water, waterblur, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Willie and son running plow with antique Case tractor HDR

October 15, 2020 by 4g3nd4

The photos in this album are of the property, possessions and projects of a fine older gentleman named Willie Shepherd.

He owns a LARGE property in Lookout, California. It is full of old tractors, cars, trucks, bulldozers and vehicles of varied and sundry description. My girlfriend Zoe bought a 1955 Carpenter (1954 GMC based) school bus from him, and he towed it the 17 miles to our Ranch with his old tractor on public roads:
www.youtube.com/watch?v=vihuX5mIFSA

Photos of the bus can be seen in another set of mine:
www.flickr.com/photos/darronb/sets/72157635098965316/

Willie also renovates and runs old steam engines. For years Willie has been showing and demonstrating his equipment for anyone interested.

A few years ago, Willie had a steam powered sawmill in operation, on which he sawed a log during his show.

This year (2014), Willie’s open house show is to be held on Father’s Day, Sunday, June 15.

You can telephone Willie at (530) 294-5141
Be patient, he’s a bit hard of hearing.
How to get to Willie’s Ranch

Almost all of the images in this set were 3-exp HDRs, processed with Photomatix. The camera was a Nikon D50.

Posted by Darron Birgenheier on 2014-05-23 00:09:46

Tagged: , Willie Shepherd , plow , outdoors , rusted , rusty , Lookout, California , “Big , Valley” , HDR , Photomatix , decrepit , “cast , iron” , ornate , vintage , antique , early , old , machinery , tractor , machines , handy , DIY , steam , long white beard , junk yard , scrap yard , metalworking , woodworking , agriculture , traction engine , two bottom plow , high desert , steam engine , Big Valley , cast iron , Old timer , High Dynamic Range , tools , farm dog , plowing , furrows , mouldboard , pine trees , field , pasture , scrap , hard working , steel wheels , wood-fired , dirty , filthy , folk art , classic , cloudy sky , sagebrush , water wheel , Juniper , country life , collection , retirement , work shop , inventor , experimenter , work , working , hard work , diligent , GSSP , Golden State Star Party , Libertarian , Gary Johnson , U.S. Constitution , freedom , Liberty

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, agriculture, antique, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Big Valley, California, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Case, cast iron, classic, cloudy sky, collection, country life, decrepit, diligent, dirty, diy, early, experimenter, farm dog, Field, filthy, folk art, for woodworking crafts, for woodworking tool, Freedom, furrows, Gary Johnson, Golden State Star Party, GSSP, guide to woodworking, handy, hard working, hard-work, HDR, high desert, High Dynamic Range, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, inventor, iron”, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Juniper, junk yard, Libertarian, Liberty, long white beard, Lookout, machinery, machines, metalworking, mouldboard, nk woodworking bathtub, oil can woodworking, Old, Old timer, ornate, outdoors, pasture, Photomatix, pine trees, plow, plowing, retirement, running, rusted, rusty, sagebrush, scrap, scrap yard, son, steam, steam engine, steel wheels, tools, traction engine, tractor, two bottom plow, U.S. Constitution, Valley”, vintage, water wheel, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, Willie, Willie Shepherd, wood-fired, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, work, work shop, working, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking, “Big, “cast Leave a comment

Willie running an antique plow behind an antique Case tractor HDR

October 12, 2020 by 4g3nd4

The photos in this album are of the property, possessions and projects of a fine older gentleman named Willie Shepherd.

He owns a LARGE property in Lookout, California. It is full of old tractors, cars, trucks, bulldozers and vehicles of varied and sundry description. My girlfriend Zoe bought a 1955 Carpenter (1954 GMC based) school bus from him, and he towed it the 17 miles to our Ranch with his old tractor on public roads:
www.youtube.com/watch?v=vihuX5mIFSA

Photos of the bus can be seen in another set of mine:
www.flickr.com/photos/darronb/sets/72157635098965316/

Willie also renovates and runs old steam engines. For years Willie has been showing and demonstrating his equipment for anyone interested.

A few years ago, Willie had a steam powered sawmill in operation, on which he sawed a log during his show.

This year (2014), Willie’s open house show is to be held on Father’s Day, Sunday, June 15.

You can telephone Willie at (530) 294-5141
Be patient, he’s a bit hard of hearing.
How to get to Willie’s Ranch

Almost all of the images in this set were 3-exp HDRs, processed with Photomatix. The camera was a Nikon D50.

Posted by Darron Birgenheier on 2014-05-23 00:09:32

Tagged: , Willie Shepherd , plow , outdoors , rusted , rusty , Lookout, California , “Big , Valley” , HDR , Photomatix , decrepit , “cast , iron” , ornate , vintage , antique , early , old , machinery , tractor , machines , handy , DIY , steam , long white beard , junk yard , scrap yard , metalworking , woodworking , agriculture , traction engine , two bottom plow , high desert , steam engine , Big Valley , cast iron , Old timer , High Dynamic Range , tools , farm dog , plowing , furrows , mouldboard , pine trees , field , pasture , scrap , hard working , steel wheels , wood-fired , dirty , filthy , folk art , classic , cloudy sky , sagebrush , water wheel , Juniper , dust cloud , dry , country life , collection , retirement , work shop , inventor , experimenter , work , working , hard work , diligent , GSSP , Golden State Star Party , bipolar photographer , Darron Birgenheier , Darron R. Birgenheier

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, agriculture, antique, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Big Valley, bipolar photographer, California, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Case, cast iron, classic, cloudy sky, collection, country life, Darron Birgenheier, Darron R. Birgenheier, decrepit, diligent, dirty, diy, Dry, dust cloud, early, experimenter, farm dog, Field, filthy, folk art, for woodworking crafts, for woodworking tool, furrows, Golden State Star Party, GSSP, guide to woodworking, handy, hard working, hard-work, HDR, high desert, High Dynamic Range, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, inventor, iron”, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Juniper, junk yard, long white beard, Lookout, machinery, machines, metalworking, mouldboard, nk woodworking bathtub, oil can woodworking, Old, Old timer, ornate, outdoors, pasture, Photomatix, pine trees, plow, plowing, retirement, running, rusted, rusty, sagebrush, scrap, scrap yard, steam, steam engine, steel wheels, tools, traction engine, tractor, two bottom plow, Valley”, vintage, water wheel, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, Willie, Willie Shepherd, wood-fired, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, work, work shop, working, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking, “Big, “cast Leave a comment

Willie running an antique plow HDR

October 6, 2020 by 4g3nd4

The photos in this album are of the property, possessions and projects of a fine older gentleman named Willie Shepherd.

He owns a LARGE property in Lookout, California. It is full of old tractors, cars, trucks, bulldozers and vehicles of varied and sundry description. My girlfriend Zoe bought a 1955 Carpenter (1954 GMC based) school bus from him, and he towed it the 17 miles to our Ranch with his old tractor on public roads:
www.youtube.com/watch?v=vihuX5mIFSA

Photos of the bus can be seen in another set of mine:
www.flickr.com/photos/darronb/sets/72157635098965316/

Willie also renovates and runs old steam engines. For years Willie has been showing and demonstrating his equipment for anyone interested.

A few years ago, Willie had a steam powered sawmill in operation, on which he sawed a log during his show.

This year (2014), Willie’s open house show is to be held on Father’s Day, Sunday, June 15.

You can telephone Willie at (530) 294-5141
Be patient, he’s a bit hard of hearing.
How to get to Willie’s Ranch

Almost all of the images in this set were 3-exp HDRs, processed with Photomatix. The camera was a Nikon D50.

Posted by Darron Birgenheier on 2014-05-23 00:09:49

Tagged: , Willie Shepherd , plow , outdoors , rusted , rusty , Lookout, California , “Big , Valley” , HDR , Photomatix , decrepit , “cast , iron” , ornate , vintage , antique , early , old , machinery , tractor , machines , handy , DIY , steam , long white beard , junk yard , scrap yard , metalworking , woodworking , agriculture , traction engine , two bottom plow , high desert , steam engine , Big Valley , cast iron , Old timer , High Dynamic Range , tools , farm dog , plowing , furrows , mouldboard , pine trees , field , pasture , scrap , hard working , steel wheels , wood-fired , dirty , filthy , folk art , classic , cloudy sky , sagebrush , water wheel , Juniper , country life , collection , retirement , work shop , inventor , experimenter , work , working , hard work , diligent , GSSP , Golden State Star Party , Libertarian , Gary Johnson , U.S. Constitution , freedom , Liberty

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, agriculture, antique, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Big Valley, California, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, cast iron, classic, cloudy sky, collection, country life, decrepit, diligent, dirty, diy, early, experimenter, farm dog, Field, filthy, folk art, for woodworking crafts, for woodworking tool, Freedom, furrows, Gary Johnson, Golden State Star Party, GSSP, guide to woodworking, handy, hard working, hard-work, HDR, high desert, High Dynamic Range, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, inventor, iron”, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Juniper, junk yard, Libertarian, Liberty, long white beard, Lookout, machinery, machines, metalworking, mouldboard, nk woodworking bathtub, oil can woodworking, Old, Old timer, ornate, outdoors, pasture, Photomatix, pine trees, plow, plowing, retirement, running, rusted, rusty, sagebrush, scrap, scrap yard, steam, steam engine, steel wheels, tools, traction engine, tractor, two bottom plow, U.S. Constitution, Valley”, vintage, water wheel, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, Willie, Willie Shepherd, wood-fired, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, work, work shop, working, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking, “Big, “cast Leave a comment

Trophy Room

October 5, 2020 by 4g3nd4

A good friend I met through Flickr, Rob www.flickr.com/photos/coastcruiser/
and I took a road trip last week looking for a few photo opportunities and one of the places we stopped was San Miguel, California.
It’s a small community along HWY 101 and one of the things in town that has interested me, and made me stop in the past, is an old grain elevator and feed building.
I hadn’t been able to see inside before but this time a couple of doors were open and while wandering around the back side along the train tracks I was able to take a look in one of those doors. There were some cool looking masks and assorted carvings that I thought made a couple of interesting shots, needless to say I did my best from the doorway.
As we went to the front of the building I went inside and talked to a man sitting by a desk and asked if we could take a look around as there was a guy working with wood. He let me know that the boss was out and he didn’t feel comfortable letting us in (liability and such). Anyway he did tell me that they used reclaimed barn wood to make furniture and wood art, and I noticed that there was quite a bit of rustic old wood inside as well as woodworking tools and a few projects about.
I will make it a point to stop by there in the future if we get back up that way, looked pretty interesting inside to me.

Taken in San Miguel, California, USA.

Posted by nedlugr on 2015-06-30 02:34:00

Tagged: , California , CA , San Miguel , Hwy 101 , elevator , wood , woodworking , mask , masks , Rustic , old , old building , Tiki

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, C&A, California, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, elevator, for woodworking crafts, for woodworking tool, guide to woodworking, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, Hwy 101, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Mask, Masks, nk woodworking bathtub, oil can woodworking, Old, Old-building, Room, Rustic, San Miguel, Tiki, Trophy, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, Wood, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Willie and son run the 1915 steam traction engine HDR

September 25, 2020 by 4g3nd4

The photos in this album are of the property, possessions and projects of a fine older gentleman named Willie Shepherd.

He owns a LARGE property in Lookout, California. It is full of old tractors, cars, trucks, bulldozers and vehicles of varied and sundry description. My girlfriend Zoe bought a 1955 Carpenter (1954 GMC based) school bus from him, and he towed it the 17 miles to our Ranch with his old tractor on public roads:
www.youtube.com/watch?v=vihuX5mIFSA

Photos of the bus can be seen in another set of mine:
www.flickr.com/photos/darronb/sets/72157635098965316/

Willie also renovates and runs old steam engines. For years Willie has been showing and demonstrating his equipment for anyone interested.

A few years ago, Willie had a steam powered sawmill in operation, on which he sawed a log during his show.

This year (2014), Willie’s open house show is to be held on Father’s Day, Sunday, June 15.

You can telephone Willie at (530) 294-5141
Be patient, he’s a bit hard of hearing.
How to get to Willie’s Ranch

Almost all of the images in this set were 3-exp HDRs, processed with Photomatix. The camera was a Nikon D50.

Posted by Darron Birgenheier on 2014-05-23 00:09:47

Tagged: , Willie Shepherd , plow , outdoors , rusted , rusty , Lookout, California , “Big , Valley” , HDR , Photomatix , decrepit , “cast , iron” , ornate , vintage , antique , early , old , machinery , tractor , machines , handy , DIY , steam , long white beard , junk yard , scrap yard , metalworking , woodworking , agriculture , traction engine , two bottom plow , high desert , steam engine , Big Valley , cast iron , Old timer , High Dynamic Range , tools , farm dog , plowing , furrows , mouldboard , pine trees , field , pasture , scrap , hard working , steel wheels , wood-fired , dirty , filthy , folk art , classic , cloudy sky , sagebrush , water wheel , Juniper , country life , collection , retirement , work shop , inventor , experimenter , work , working , hard work , diligent , GSSP , Golden State Star Party , Libertarian , Gary Johnson , U.S. Constitution , freedom , Liberty

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, agriculture, antique, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Big Valley, California, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, cast iron, classic, cloudy sky, collection, country life, decrepit, diligent, dirty, diy, early, engine, experimenter, farm dog, Field, filthy, folk art, for woodworking crafts, for woodworking tool, Freedom, furrows, Gary Johnson, Golden State Star Party, GSSP, guide to woodworking, handy, hard working, hard-work, HDR, high desert, High Dynamic Range, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, inventor, iron”, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Juniper, junk yard, Libertarian, Liberty, long white beard, Lookout, machinery, machines, metalworking, mouldboard, nk woodworking bathtub, oil can woodworking, Old, Old timer, ornate, outdoors, pasture, Photomatix, pine trees, plow, plowing, retirement, run, rusted, rusty, sagebrush, scrap, scrap yard, son, steam, steam engine, steel wheels, tools, traction, traction engine, tractor, two bottom plow, U.S. Constitution, Valley”, vintage, water wheel, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, Willie, Willie Shepherd, wood-fired, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, work, work shop, working, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking, “Big, “cast Leave a comment

Maker Ed Convening at the Crucible

September 23, 2020 by 4g3nd4

A couple hundred makers, teachers and parents gathered at the 2nd Maker Educator Convening, held May 17 – 18, 2016, at The Crucible in Oakland, CA. This was my first conference as a maker art teacher, and it was a great way to connect with other educators and learn from each other.

We started with a visit of The Crucible, an amazing arts school that offers youth and adult classes in glass blowing, woodworking, jewelry, welding and more — a great model for planning our own makerspaces ( thecrucible.org/ ) .

We then watched and discussed ‘Most Likely to Succeed’, an excellent documentary on education in the 21st century ( www.mltsfilm.org/ ). It shows examples of hands-on, project-based, student-driven and collaborative learning — and how this new approach can help students find a sense of purpose and develop invaluable ‘soft skills’, not just technical skills.

The morning keynote by Nichole Pinkard was also very inspiring, as she presented her findings from the Digital Youth Network in Chicago, and led a discussion about deepening the impact of maker education by bridging learning frameworks.

We then got our hands dirty to map our maker educator network, using blinking LEDs, post-it notes and pipe cleaners to represent our various schools and makerspaces on a U.S. map — which showed clearly that a majority of participants came from California.

We spent the rest of the day hearing lightning talks about maker ed, brainstorming ideas, sharing best practices and starting new collaborations. A very productive event!

Many thanks to the team at MakerEd.org for organizing this gathering. They do a fine job connecting teachers and resources, both at events like these and online: makered.org/

Posted by fabola on 2016-05-28 09:13:16

Tagged: , california , collaboration , convening , crucible , east bay , education , idea , learning , maker , maker ed , #makeredconvening , makerspace , map , network , oakland , parent , school , skills , soft skills , student , teacher , youth

Categories Uncategorized Tags #makeredconvening, 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, California, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, collaboration, convening, crucible, east bay, education, for woodworking crafts, for woodworking tool, guide to woodworking, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, idea, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, learning, maker, maker ed, makerspace, map, Network, nk woodworking bathtub, oakland, oil can woodworking, Parent, school, Skills, soft skills, student, teacher, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking, youth Leave a comment

Feathered death

September 19, 2020 by 4g3nd4

Blogged in The Woodwork: Faking long exposure

Feathered Death
Baker Beach, San Francisco, California

Nikon D3, Nikkor 14-24mm f/2.8G
Aperture 2.0 (raw fine tuning, spot & patch, straighten, white balance, dodge & burn) nik Color Efex Pro (contrast color range, bi-color user defined, bleach bypass, glamour glow) Photoshop (heal)
1/60sec @ f/18, iso200, 14mm (14mm)

____________________________________________________

Visiting Baker Beach.

While returning to the car, I passed near a seagull looked at me guiltily and then flew away. I was curious what it was looking at and noticed that it was a dead bird whose legs had been caught in some cloth flotsam and had been washed ashore.

This photo was taken handheld in aperture mode which was adjusted to have as much depth of field possible and still be well above the shake limit. The 14mm has no trouble focusing close but the dust on the lens left a lot of blemishes that appeared easily after post processing. I’m going to have to look into a good portable cleaning solution as the surface would take forever to clean with a LensPen. I remembered to bring my GPS with me (with batteries) so the location data is accurate (though I forgot to adjust my camera for daylight savings time so I had to shift things over 3600 seconds).

I used dodge and burn to try to reclaim some dynamic range in the overexposed background (burn) while getting some feather detail in shadow (dodge). The spot & patch algorithm was very poor for dust spots in the sand so I had to heal that (as well as lens dust) in Photoshop.

I used contrast color to get better separation between sand and sea, a bi-color to magnify that effect even more and “postcard” the image without messing with the saturation, and then bleach bypass and glow to create the otherworldly look around the dead bird. Most of these filters were not applied to the bird itself using a negative u-point.

I tested the new dodge and burn tool in Aperture 2.0.1 update. It worked very well, but I’m disappointed that it has to generate a TIFF file in order to work. It’d be nice if it used the RAW file and just stored sidecar files that had the masks. The weird thing is if you edit using an external editor and then edit in Photoshop, it loses the version with your dodge and burn edits. In fact, 2.0.1 and 2.0 before it has introduced many, many bugs involving preview generation and versioning. For instance, if you replace the PSD file or edit a PSD file that you’ve already commented, it will reimport the EXIF and IPTC information and smash all your edits in Aperture. Besides the fact that you can no longer use the PSD-replacement trick (to preserve metadata from external creation tools like PTMac and DxO Optics Pro via PSD generation), it destroys all your IPTC work you might have done before round tripping with Photoshop. That is stupid. Another example is preview generation on expanded canvases with a alpha channel that has been colored in are rendered transparent no matter what in the original and then exported as black. So effectively those parts of the image become unusable! (Workaround: save a copy as PSD with alpha unchecked and than overwrite the current PSD) WTF? I mean this stuff worked in Aperture 1.0. Apple has taken the common-sense way of handling versioning and trashed it in order to make room for the API which isn’t really ready yet. They could have done much better if they asked the service to generate previews and gave it the ability to store sidecars. This would be far more versatile than the current stuff which is no better than Photoshop at this point (though the RAW rendering support will be change that for us DxO Optics Pro users). There is no need to actually save the rendered TIFFs—and why TIFF anyway? Those files are huge. Why not store losslessly compressed JPEG2000s are 1/2 the size of TIFFs for photos).

By the way Aperture 2.0 lost support of JPEG2000. (It was buggy in Aperture 1.0). That’s bad because I save my scanner output as high quality JPEG2000’s since they have 48bit dynamic range and yet are about 1/20 the size of a TIFF with almost no noticeable loss in quality. Support all Quicktime-compatible image formats for import! This is why I buy expensive computers, Apple. (Thumbnails should still be JFIF (JPEG) simply because the algorithm for working with JPEG2000’s seems a bit slow even on a fast computer.)

When I do a lot of Photoshop and Aperture 2.0 work, the hard drive starts swapping in a bad way and won’t stop. Very frustrating. What should have been a 15 minute postprocessing ended up wasting 3 hours because of bugs in Aperture and swap.

Finally, I decided not to provide the full resolution versions of the images and added a border around the image (but no watermark). This should still be good enough, if not better, for use under the Creative Commons in websites and blogs, but if you need a print-quality (larger than postcard size) version of the photo, this way you’ll have to contact me for the image. The border design and information is a rip-off of various parts from my favorite photographers: Kevin Kubota, Tony Sweet, Russ Morris, Ryan Brenizer, Jim Goldstein, and Andrei Zmievski.

Click for original photograph (If you cannot view this, add me to your contacts and I’ll add you to my friends. If you are already a contact of mine then just jet me a message and I’ll fix your status.)

Posted by tychay on 2008-04-02 11:47:48

Tagged: , heal , digital glamour glow , Bay Area , white balance adjustment , equipment , descriptive places , camera , nature , Pacific Ocean , places , colors , California , outdoor , Apple Aperture , digital bi-color user defined , dead , San Francisco , Nikkor , 14-24mm f/2.8G , brown , Northern California , digital color contrast range , Nikon D3 , Photoshop , portrait orientation , handheld , post-processing , subjects , nik Color Efex Pro , raw fine tuning adjustment , wildlife , spot & patch adjustment , orientation , dodge & burn edit , sand , animal , shooting traits , straighten adjustment , hiking , blue , Apple Aperture 2.0 , United States , Baker Beach , digital bleach bypass , ocean , water , beach , lens , expired , bird , photo specs , sky

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 14-24mm f/2.8G, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, animal, Apple Aperture, Apple Aperture 2.0, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Baker Beach, Bay Area, beach, Bird, Blue, brown, California, Camera, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, colors, dead, Death, descriptive places, digital bi-color user defined, digital bleach bypass, digital color contrast range, digital glamour glow, dodge & burn edit, Equipment, expired, Feathered, for woodworking crafts, for woodworking tool, guide to woodworking, handheld, heal, hiking, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Lens, Nature, nik Color Efex Pro, nikkor, Nikon D3, nk woodworking bathtub, Northern California, Ocean, oil can woodworking, orientation, outdoor, Pacific Ocean, photo specs, photoshop, Places, portrait orientation, post-processing, raw fine tuning adjustment, San Francisco, sand, shooting traits, sky, spot & patch adjustment, straighten adjustment, subjects, United States, water, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, white balance adjustment, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, wildlife, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

552-IMG_1467e Farmhouse table for Outdoor use – Northern California

September 15, 2020 by 4g3nd4

Close view of the top showing some cracks that we made by hand to emulate wear and tear and age.

Posted by www.inventiadesignpdx.com on 2013-04-23 06:08:04

Tagged: , bespoke made to order custom farmhouse table benches antique fin , antique finish farmhouse table used outdoors , outdoor dining table California , Indoor outdoor furniture Seattle , antique dining table leaves , extension farmhouse table , french farm table , European look old world antique finish dining table , farm table , large extension antique dining table with leaves , Portland Oregon custom made furniture , hand planed distressed antique finish , European furniture bespoke hand crafted dining table , dining table for sale , french country antiques , french country table , french country dining room trestle table , trestle dining table , sustainable hand crafted , refractory antique dining table , casual dining table made in the USA , made in America , handmade unique antique finish distressed honey colored furnitur , custom woodworking handmade dining table with leaves , pullout breadboard end for dining table leaves , bespoke made to order custom farmhouse table benches antique finish , handmade unique antique finish distressed honey colored furniture dining table bench

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 552IMG1467e, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, antique dining table leaves, antique finish farmhouse table used outdoors, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, bespoke made to order custom farmhouse table benches antique fin, bespoke made to order custom farmhouse table benches antique finish, California, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, casual dining table made in the USA, custom woodworking handmade dining table with leaves, dining table for sale, European furniture bespoke hand crafted dining table, European look old world antique finish dining table, extension farmhouse table, farm table, farmhouse, for woodworking crafts, for woodworking tool, french country antiques, french country dining room trestle table, french country table, french farm table, guide to woodworking, hand planed distressed antique finish, handmade unique antique finish distressed honey colored furnitur, handmade unique antique finish distressed honey colored furniture dining table bench, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, Indoor outdoor furniture Seattle, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, large extension antique dining table with leaves, made in America, nk woodworking bathtub, Northern, oil can woodworking, outdoor, outdoor dining table California, Portland Oregon custom made furniture, pullout breadboard end for dining table leaves, refractory antique dining table, sustainable hand crafted, table, trestle dining table, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Kelby’s Digital Photography series

September 13, 2020 by 4g3nd4

Blogged in The Woodwork: When (to learn more about) dSLR (photography) [The entry kit dSLR Part 7]

Kelby’s Digital Photography series
Costco, South of Market, San Francisco, California

Olympus E-P2, Lumix G Vario HD 1:4.0-5.8/14-140 ASPH. MEGA O.I.S.
Adobe Camera RAW, nik Dfine, nik Color Efex Pro (pro contrast), nik Sharpener Pro (output sharpen)
1/60sec @ ƒ4.7, ISO400, 25mm (50mm)

____________________________________________________

Noticed that Scott Kelby’s introductory books on digital photography are for sale at Costco. It might be a good read for beginners—it is, after all, the best selling digital photography books of all time.

Shooting notes: Costco has too many lights creating too many specular highlights. 🙁

Click for original photograph (If you cannot view this, add me to your contacts and I’ll add you to my friends. If you are already a contact of mine then just jet me a message and I’ll fix your status.)

Posted by tychay on 2010-01-25 04:39:53

Tagged: , California , nik Color Efex Pro , Adobe Camera RAW , places , SoMa , nik Dfine , books , equipment , BorderFX , businesses , Costco , photo camera , output sharpen , post-processing , Lumix G Vario HD 1:4.0-5.8/14-140 ASPH. MEGA O.I.S , Panasonic , lens , Northern California , United States , Bay Area , stuff , Olympus E-P2 , nik Dfine 2.0 , San Francisco , nik Sharpener Pro , digital pro contrast

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, Adobe Camera RAW, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Bay Area, Books, BorderFX, businesses, California, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Costco, digital, digital pro contrast, Equipment, for woodworking crafts, for woodworking tool, guide to woodworking, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Kelbys, Lens, Lumix G Vario HD 1:4.0-5.8/14-140 ASPH. MEGA O.I.S, nik Color Efex Pro, nik Dfine, nik Dfine 2.0, nik Sharpener Pro, nk woodworking bathtub, Northern California, oil can woodworking, Olympus E-P2, output sharpen, panasonic, photo camera, photography, Places, post-processing, San Francisco, Series, SoMa, stuff, United States, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

R.M.S. Queen Mary – a Nautical Money Pit

September 13, 2020 by 4g3nd4

The Postcard

A postcard that was printed and published by J. Salmon Ltd. of Sevenoaks.

The card was posted in Surrey on Thursday the 26th. April 1951 to:

Mrs. Elliott,
St. Margaret’s,
254, Carshalton Road,
Sutton,
Surrey.

The message on the divided back was as follows:

"This is a complete contrast
to the usual P.C., but I thought
it would interest you.
What a mighty vessel!
Hope you are enjoying this
lovely weather.
I am so glad that Mr. Elliott is
so much better.
Much love,
J & W".

RMS Queen Mary

The RMS Queen Mary is a retired British ocean liner that sailed primarily on the North Atlantic Ocean from 1936 to 1967 for the Cunard Line (known as Cunard-White Star Line when the vessel entered service) and built by John Brown & Company in Clydebank, Scotland.

The Queen Mary, along with RMS Queen Elizabeth, were built as part of Cunard’s planned two-ship weekly express service between Southampton, Cherbourg and New York. The two ships were a British response to the express superliners built by German, Italian and French companies in the late 1920’s and early 1930’s.

The Queen Mary sailed on her maiden voyage on the 27th. May 1936 and won the Blue Riband that August; she lost the title to SS Normandie in 1937 and recaptured it in 1938, holding it until 1952 when it was taken by the new SS United States.

With the outbreak of the Second World War, she was converted into a troopship and ferried Allied soldiers during the conflict.

Following the war, the Queen Mary was refitted for passenger service, and along with the Queen Elizabeth commenced the two-ship transatlantic passenger service for which they were originally built. The two ships dominated the transatlantic passenger market until the dawn of the jet age in the late 1950’s. By the mid-1960’s, Queen Mary was ageing and was operating at a loss.

After several years of decreased profits for Cunard Line, the Queen Mary was officially retired from service in 1967. She left Southampton for the last time on the 31st. October 1967 and sailed to the port of Long Beach, California, United States, where she remains permanently moored.

The ship serves as a tourist attraction featuring restaurants, a museum and a hotel. The ship is listed on the National Register of Historic Places.

The Queen Mary was featured in the film ‘Assault on a Queen’ (1966) starring Frank Sinatra.

The Construction and Naming of RMS Queen Mary

With Germany launching Bremen and Europa into service, Britain did not want to be left behind in the shipbuilding race. White Star Line began construction of their 80,000-ton Oceanic in 1928, while Cunard planned a 75,000-ton unnamed ship of their own.

Construction of the Queen Mary, then known only as ‘Hull Number 534’, began in December 1930 on the River Clyde by John Brown & Company. Work was halted in December 1931 due to the Great Depression, and Cunard applied to the British Government for a loan to complete 534. The loan was granted, with enough money to complete the unfinished ship, and also to build a running mate, with the intention to provide a two ship weekly service to New York.

One condition of the loan was that Cunard merge with the White Star Line, another struggling British shipping company, which was Cunard’s chief British rival at the time and which had already been forced by the depression to cancel construction of its Oceanic.

Both lines agreed, and the merger was completed on the 10th. May 1934. Work on the Queen Mary resumed immediately and she was launched on the 26th. September 1934. Completion ultimately took ​3 1⁄2 years and cost £3,500,000, then equal to 17.5 million US dollars, and equivalent to $334,459,000 in 2019.

Prior to the ship’s launch, the River Clyde had to be specially deepened to cope with her size.

The ship was named after Mary of Teck, consort of King George V. Until her launch, the name was kept a closely guarded secret. Legend has it that Cunard intended to name the ship Victoria, in keeping with company tradition of giving its ships names ending in "ia". However when company representatives asked the king’s permission to name the ocean liner after Britain’s ‘Greatest Queen’, he said his wife, Mary of Teck, would be delighted. And, so the legend goes, the delegation had no other choice but call the ship the Queen Mary.

Support for the story was provided by Washington Post editor Felix Morley, who sailed as a guest of the Cunard Line on Queen Mary’s 1936 maiden voyage. In his 1979 autobiography, ‘For the Record’, Morley wrote that he was placed at table with Sir Percy Bates, chairman of the Cunard Line. Bates told him the story of the naming of the ship "On condition you won’t print it during my lifetime."

The name had already been given to the Clyde turbine steamer TS Queen Mary, so Cunard made an arrangement with its owners, and this older ship was renamed Queen Mary II.

Queen Mary was fitted with 24 Yarrow boilers in four boiler rooms and four Parsons turbines in two engine rooms. There were four propellers, each turning at 200 RPM. The Queen Mary achieved 32.84 knots on her acceptance trials in early 1936.

From Launching to World War II

In 1934 the new liner was launched by Queen Mary as RMS Queen Mary. On her way down the slipway, Queen Mary was slowed by eighteen drag chains, which checked the liner’s progress into the River Clyde.

When she sailed on her maiden voyage from Southampton on the 27th. May 1936, she was commanded by Sir Edgar Britten, who had been the master-designate for Cunard White Star whilst the ship was under construction at the John Brown shipyard.

The Queen Mary measured 80,774 gross register tons (GRT). Her rival Normandie, which originally grossed 79,280 tonnes, had been modified the preceding winter to increase her size to 83,243 GRT (an enclosed tourist lounge was built on the aft boat deck on the area where the game court was), and therefore reclaimed the title of the world’s largest ocean liner from the Queen Mary, who had only held it for a few weeks.

The Queen Mary sailed at high speed for most of her maiden voyage to New York, until heavy fog forced a reduction of speed on the final day of the crossing, arriving in New York Harbor on the 1st. June 1936.

Queen Mary’s design was criticised for being too traditional, especially when Normandie’s hull was revolutionary with a clipper-shaped, streamlined bow. Except for her cruiser stern, the Queen Mary seemed to be an enlarged version of her Cunard predecessors from the pre–First World War era.

Furthermore, her interior design, while mostly Art Deco, seemed restrained and conservative when compared to the ultramodern French liner. Nevertheless the Queen Mary proved to be more popular than her rival, in terms of passengers carried.

In August 1936, the Queen Mary captured the Blue Riband from Normandie, with average speeds of 30.14 knots (55.82 km/h; 34.68 mph) westbound and 30.63 knots (56.73 km/h; 35.25 mph) eastbound. Normandie was refitted with a new set of propellers in 1937 and reclaimed the honour, but in 1938 Queen Mary took back the Blue Riband in both directions with average speeds of 30.99 knots (57.39 km/h; 35.66 mph) westbound and 31.69 knots (58.69 km/h; 36.47 mph) eastbound, records which stood until lost to the United States in 1952.

The Interior of RMS Queen Mary

Among facilities available on board the Queen Mary, the liner featured two indoor swimming pools, beauty salons, libraries and children’s nurseries for all three classes, a music studio and lecture hall, telephone connectivity to anywhere in the world, outdoor paddle tennis courts and dog kennels.

The largest room onboard was the cabin class (first class) main dining room (grand salon), spanning three stories in height and anchored by wide columns. The ship had many air-conditioned public rooms onboard. The cabin-class swimming pool facility spanned over two decks in height.

The Queen Mary was the first ocean liner to be equipped with her own Jewish prayer room – part of a policy to show that British shipping lines avoided the antisemitism evident at that time in Nazi Germany.

The cabin-class main dining room featured a large map of the transatlantic crossing, with twin tracks symbolising the winter/spring route (further south to avoid icebergs) and the summer/autumn route. During each crossing, a motorised model of Queen Mary would indicate the vessel’s progress en route.

As an alternative to the main dining room, Queen Mary featured a separate cabin-class Verandah Grill on the Sun Deck at the upper aft of the ship. The Verandah Grill was an exclusive à la carte restaurant with a capacity of approximately eighty passengers, and was converted to the Starlight Club at night. Also on board was the Observation Bar, an Art Deco-styled lounge with wide ocean views.

Woods from different regions of the British Empire were used in her public rooms and staterooms. Accommodation ranged from fully equipped, luxurious first class staterooms to modest and cramped third-class cabins.

The Queen Mary And World War II

In late August 1939, the Queen Mary was on a return run from New York to Southampton. The international situation led to her being escorted by the battlecruiser HMS Hood. She arrived safely, and set out again for New York on the 1st. September. By the time she arrived, the Second World War had started and she was ordered to remain in port alongside Normandie until further notice.

In March 1940, Queen Mary and Normandie were joined in New York by Queen Mary’s new sister ship the Queen Elizabeth, fresh from her secret dash from Clydebank. The three largest liners in the world sat idle for some time until the Allied commanders decided that all three ships could be used as troopships.

Normandie was destroyed by fire during her troopship conversion. Queen Mary left New York for Sydney, Australia, where she, along with several other liners, was converted into a troopship to carry Australian and New Zealand soldiers to the United Kingdom.

In the Second World War conversion, the Queen Mary’s hull, superstructure, and funnels were painted navy grey. As a result of her new colour, and in combination with her great speed, she became known as the ‘Grey Ghost’.

To protect against magnetic mines, a degaussing coil was fitted around the outside of the hull. Inside, stateroom furniture and decoration were removed and replaced with triple-tiered (fixed) wooden bunks, which were later replaced by ‘standee’ (fold-up) bunks.

A total of 6 miles (10 km) of carpet, 220 cases of china, crystal and silver services, tapestries, and paintings were removed and stored in warehouses for the duration of the war. The woodwork in the staterooms, the cabin-class dining room, and other public areas was covered with leather.

The Queen Mary and Queen Elizabeth were the largest and fastest troopships involved in the war, often carrying as many as 15,000 men in a single voyage, and often travelling out of convoy and without escort. Their high speed and zigzag courses made it virtually impossible for U-boats to catch them.

On the 2nd. October 1942, the Queen Mary accidentally sank one of her escort ships, slicing through the light cruiser HMS Curacoa off the Irish coast with a loss of 239 lives. The Queen Mary was carrying thousands of Americans of the 29th. Infantry Division to join the Allied forces in Europe. Due to the risk of U-boat attacks, Queen Mary was under orders not to stop under any circumstances and steamed onward with a fractured stem.

Some sources claim that hours later, the convoy’s lead escort returned to rescue 99 survivors of Curacoa’s crew of 338, including her captain John W. Boutwood. This claim is refuted by the liner’s then-Staff Captain Harry Grattidge, who records that the Queen Mary’s Captain, Gordon Illingsworth, immediately ordered the accompanying destroyers to look for survivors within moments of the Curacoa’s sinking.

From the 25th.–30th. July 1943, Queen Mary carried 15,740 soldiers and 943 crew (total 16,683), a standing record for the most passengers ever transported on one vessel. During this trip, while 700 miles (1,100 km) from Scotland during a gale, she was suddenly hit broadside by a rogue wave that might have reached a height of 28 metres (92 ft).

Dr. Norval Carter, part of the 110th. Station Hospital on board at the time, wrote in a letter that at one point:

‘The Queen Mary damned near capsized.
One moment the top deck was at its usual
height and then, swoom! Down, over, and
forward she would pitch.’

It was calculated later that the ship had rolled 52 degrees, and would have capsized had she rolled another 3 degrees.

During the war the Queen Mary carried British Prime Minister Winston Churchill across the Atlantic for meetings with fellow Allied forces officials on several occasions. He was listed on the passenger manifest as ‘Colonel Warden’.

The Queen Mary After World War II

After delivering a load of war brides to Canada, Queen Mary made her fastest ever crossing, returning to Southampton in only three days, 22 hours and 42 minutes at an average speed of just under 32 knots (59 km/h).

From September 1946 to July 1947, Queen Mary was refitted for passenger service, adding air conditioning and upgrading her berth configuration to 711 first class (formerly called cabin class), 707 cabin class (formerly tourist class) and 577 tourist class (formerly third class) passengers.

Following refit, the Queen Mary and Queen Elizabeth dominated the transatlantic passenger trade as Cunard White Star’s two-ship weekly express service through the latter half of the 1940’s and well into the 1950’s. They proved highly profitable for Cunard (as the company was renamed in 1947).

On the 1st. January 1949, the Queen Mary ran aground off Cherbourg, France. She was refloated the next day, and returned to service.

In 1958 the first transatlantic flight by a jet began a completely new era of competition for the Cunard Queens. On some voyages, winters especially, Queen Mary sailed into harbour with more crew than passengers, though both she and Queen Elizabeth still averaged over 1,000 passengers per crossing into the middle 1960’s. By 1965, the entire Cunard fleet was operating at a loss.

Hoping to continue financing the Queen Elizabeth 2 which was under construction at Brown’s shipyard, Cunard mortgaged the majority of the fleet. Due to a combination of age, lack of public interest, inefficiency in a new market and the damaging after-effects of the national seamen’s strike, Cunard announced that both Queen Mary and Queen Elizabeth would be retired from service and sold off.

Many offers were submitted, and the bid of $3.45m/£1.2m from Long Beach, California beat the Japanese scrap merchants.

Queen Mary was retired from service in 1967. On the 27th. September, she completed her 1,000th. and last crossing of the North Atlantic, having carried 2,112,000 passengers over 3,792,227 miles (6,102,998 km). Under the command of Captain John Treasure Jones, who had been her captain since 1965, she sailed from Southampton for the last time on the 31st. October with 1,093 passengers and 806 crew.

After a voyage around Cape Horn, she arrived in Long Beach on the 9th. December. The Queen Elizabeth was withdrawn in 1968, and Queen Elizabeth 2 took over the transatlantic route in 1969.

The Queen Mary at Long Beach

The Queen Mary is permanently moored as a tourist attraction, hotel, museum and event facility in Long Beach. From 1983 to 1993, Howard Hughes’ plane H-4 Hercules was located in a large dome nearby. The dome was later repurposed as a sound stage for film and television. The structure is now used by Carnival Cruise Lines as a ship terminal, as a venue for the Long Beach Derby Gals roller derby team and as an event venue.

Conversion of the Queen Mary

When the Queen Mary was bought by Long Beach, the new owners decided not to preserve her as an ocean liner. It was decided to clear almost every area of the ship below C deck (called R deck after 1950, to lessen passenger confusion, as the restaurants were located on R deck). The clearance was to make way for Jacques Cousteau’s new Living Sea Museum. This increased museum space to 400,000 square feet (37,000 m2).

When the Queen Mary came to Long Beach, the Sun Deck windows were enlarged, and an anti-aircraft gun was placed on display astride the foremast to represent the Second World War days of the liner.

The conversion at Long Beach required removal of all the boiler rooms, the forward engine room, both turbo generator rooms, the ship stabilisers and the water softening plant. The ship’s empty fuel tanks were filled with local mud to keep the ship’s centre of gravity and draft at the correct levels, as these critical factors had been affected by the removal of the various components and structure. Only the aft engine room and ‘shaft alley’, at the stern of the ship, was spared.

During the conversion the funnels were removed, as this area was needed to lift out the scrap materials from the engine and boiler rooms. Workers found that the funnels were significantly degraded, and they were replaced with replicas.

With all of the lower decks nearly gutted, Diners Club, the initial lessee of the ship, converted the remainder of the vessel into a hotel. Diners Club Queen Mary dissolved and vacated the ship in 1970 after their parent company, Diners Club International, was sold, and a change in direction was mandated during the conversion process. Specialty Restaurants, a Los Angeles-based company that focused on theme-based restaurants, took over as master lessee the following year.

This second plan was based on converting most of her first- and second-class cabins on A and B decks into hotel rooms, and converting the main lounges and dining rooms into banquet spaces. On Promenade Deck, the starboard promenade was enclosed to feature an upscale restaurant and café named Lord Nelson’s and Lady Hamilton’s; it was themed in the fashion of early-19th century sailing ships. The famed and elegant Observation Bar was redecorated as a western-themed bar.

The smaller first-class public rooms, such as the Drawing Room, Library, Lecture Room and the Music Studio, were stripped of most of their fittings and converted to commercial use. This markedly expanded retail space on the ship. Two more shopping malls were built on the Sun Deck in separate spaces previously used for first-class cabins and engineers’ quarters.

A post-war feature of the ship, the first-class cinema, was removed for kitchen space for the new Promenade Deck dining venues. The first-class lounge and smoking room were reconfigured and converted into banquet space. The second-class smoking room was subdivided into a wedding chapel and office space.

On the Sun Deck, the elegant Verandah Grill was gutted and converted into a fast-food eatery, while a new upscale dining venue was created directly above it on Sports Deck, in space once used for crew quarters.

The second-class lounges were expanded to the sides of the ship and used for banqueting. On R deck, the first-class dining room was reconfigured and subdivided into two banquet venues, the Royal Salon and the Windsor Room. The second-class dining room was subdivided into kitchen storage and a crew mess hall, while the third-class dining room was initially used as storage and crew space.

Also on R deck, the first-class Turkish bath complex, the 1930’s equivalent to a spa, was removed. The second-class pool was removed and its space initially used for office space, while the first-class swimming pool was open for viewing by hotel guests and visitors.

Because of modern safety codes and the compromised structural soundness of the area directly below, the swimming pool could not be used for swimming after the conversion, although it was filled with water until the late 1980’s. Today the pool can only be seen on guided tours and is in a derelict condition, having never been maintained by the hotel operators. No second-class, third-class or crew cabins remain intact aboard the ship today.

The Queen Mary as a Tourist Attraction

On the 8th. May 1971 the Queen Mary opened her doors to tourists. Initially, only portions of the ship were open to the public as Specialty Restaurants had yet to open its dining venues and PSA had not completed work converting the ship’s original First Class staterooms into the hotel.

As a result, the ship was open only on weekends. On the 11th. December 1971 Jacques Cousteau’s Museum of the Sea opened, with a quarter of the planned exhibits completed. Within the decade, Cousteau’s museum closed due to low ticket sales and the deaths of many of the fish that were housed in the museum.

On 2 November 1972 the PSA Hotel Queen Mary opened its initial 150 guest rooms. Two years later, with all 400 rooms finished, PSA brought in Hyatt Hotels to manage the hotel, which operated from 1974 to 1980 as the Queen Mary Hyatt Hotel.

By 1980, it had become apparent that the existing system was not working. The ship was losing millions each year for the city because the hotel, restaurants and museum were run by three separate concessionaires, while the city owned the vessel and operated guided tours. It was decided that a single operator with more experience in attractions was needed.

Jack Wrather, a local millionaire, had fallen in love with the ship because he and his wife, Bonita Granville, had fond memories of sailing on it numerous times. Wrather signed a 66-year lease with the city of Long Beach to operate the entire property. He oversaw the display of the Spruce Goose, on long-term loan. The immense plane, which had been sitting in a hangar in Long Beach for decades unseen by the public, was installed in a huge geodesic dome adjacent to the liner in 1983, attracting increased attendance.

Jack’s Wrather Port Properties operated the entire attraction after his death in 1984 until 1988, when his holdings were bought by the Walt Disney Company. Wrather had built the Disneyland Hotel in 1955, when Walt Disney had insufficient funds to construct the hotel himself. Disney had been trying to buy the hotel for 30 years. When they finally succeeded, they also acquired the Queen Mary. This was never marketed as a Disney property.

Through the late 1980’s and early 1990’s the Queen Mary struggled financially. Disney pinned their hopes for turning the attraction around on Port Disney, a huge planned resort on the adjacent docks. It was to include an attraction known as DisneySea, a theme park celebrating the world’s oceans. The plans eventually fell through; in 1992 Disney gave up the lease on the ship to focus on building what would become Disney California Adventure Park.

With Disney gone, the Hotel Queen Mary closed on the 30th. September 1992. The owners of the Spruce Goose, the Aero Club of Southern California, sold the plane to the Evergreen Aviation & Space Museum in Oregon. The plane departed on barges on the 2nd. October 1992, leaving the huge dome empty. The Queen Mary tourist attraction remained open for another two months, but on the 31st. December 1992, the Queen Mary closed her doors to tourists and visitors.

On the 5th. February 1993, RMS Foundation Inc. signed a five-year lease with the city of Long Beach to act as the operators of the property. The foundation was run by Joseph F. Prevratil, who had managed the attraction for Wrather. On the 26th. February 1993 the tourist attraction re-opened, while the hotel reopened partially on the 5th. March with 125 rooms and the banquet facilities, with the remainder of the rooms coming online on the 30th. April.

In 1995, RMS’s lease was extended to twenty years, while the scope of the lease was reduced to operation of the ship. A new company, Queen’s Seaport Development, Inc. (QSDI), was established in 1995 to control the real estate adjacent to the vessel. In 1998, the city of Long Beach extended the QSDI lease to 66 years.

In 2004, Queen Mary and Stargazer Productions added Tibbies Great American Cabaret to the space previously occupied by the ship’s bank and wireless telegraph room. Stargazer Productions and Queen Mary transformed the space into a working dinner theatre complete with stage, lights, sound and scullery.

In 2005, QSDI sought Chapter 11 protection due to a rent credit dispute with the city. In 2006, the bankruptcy court requested bids from parties interested in taking over the lease from QSDI. The minimum required opening bid was $41M. The operation of the ship, by RMS Foundation, remained independent of the bankruptcy. In summer 2007, Queen Mary’s lease was sold to a group named ‘Save the Queen’, managed by Hostmark Hospitality Group.

They planned to develop the land adjacent to the Queen Mary, and upgrade, renovate and restore the ship. During their management, staterooms were updated with iPod docking stations and flatscreen TVs and the ship’s three funnels and waterline area were repainted their original Cunard Red colour. The portside Promenade Deck’s planking was restored and refinished. Many lifeboats were repaired and patched, and the ship’s kitchens were renovated with new equipment.

In late September 2009, management of Queen Mary was taken over by Delaware North Companies, who planned to continue restoration and renovation of the ship and its property. They were determined to revitalise and enhance the ship as an attraction. But in April 2011, the city of Long Beach was informed that Delaware North was no longer managing Queen Mary.

In 2016 Urban Commons, a real estate company, assumed the lease of the Queen Mary. They revealed plans to extensively renovate the liner over the next year, and to redevelop the adjacent 45 acres of parking with a boutique hotel, restaurants, a marina, an amphitheatre, jogging trails, bike paths and possibly a huge Ferris wheel, all at a cost of up to $250 million.

In July 2017, while making repairs to a bathroom, workers rediscovered the ship’s forward gear room which had once controlled the ships 16-ton anchors. The room was apparently sealed up during the 1960’s conversion and was forgotten for decades.

The Condition of the Queen Mary

In 2017 a report on the ship’s condition was issued. The report noted that not only the hull but also the supports for a raised exhibition area within the ship were corroding, and that the ship’s deteriorating condition left areas such as the engine room vulnerable to flooding. Repairs were estimated at close to $300 million.

In November 2016 the City of Long Beach had put $23 million toward addressing the Queen Mary’s most vital repairs. John Keisler, economic and property development director for Long Beach, said:

"We have a timeline in which the
engineers believe they can complete
those immediate projects. These are
major challenges we can only address
over time; it can’t all be done at once."

Political leaders in Scotland, birthplace of the Queen Mary, called for the then-UK Prime Minister Theresa May to pressure the American government to fund a full repair of the liner in 2017, but this did not happen.

In August 2019, Edward Pribonic, the engineer responsible for inspecting the Queen Mary on behalf of the City of Long Beach, issued a report stating that the ship was in the worst condition he had seen in his 25 years on the job. Pribonic stated that the neglect of the Queen Mary had grown worse under the management of Urban Commons, and concluded that:

"Without an immediate and very significant
infusion of manpower and money, the
condition of the ship will likely soon be
unsalvageable.”

Incidents of recent neglect included the flooding of the Grand Ballroom with sewage after a pipe which was flimsily patched with duct tape burst, significant amounts of standing water in the ship’s bilge, and the peeling of recently applied paint on the ship’s funnels because of the poor way in which it had been applied. The pessimistic conclusion of Pribonic was disputed by city officials, who called the warnings ‘hyperbolic’ and pointed to the "significant" work that has already been undertaken towards repairing the Queen Mary.

The $23 million apportioned for repairs ran out in 2018, with 19 out of the 27 urgent projects identified by a 2015 marine survey completed as of September 2019.

There were significant cost overruns overall, with the cost of fire safety repairs skyrocketing from the original estimate of $200,000, to $5.29 million. Two of the remaining 8 issues identified in 2015 were considered "critical" – this included the removal of the ship’s lifeboats, which had rotted and were in danger of collapsing.

In October 2019, the City of Long Beach warned Urban Commons that the company was failing to uphold its commitment to maintain and repair the Queen Mary, and that it was accordingly in danger of defaulting on its 66-year lease agreement. Urban Commons responded with an updated plan for repairs, including the removal of the lifeboats at a cost of between $5 and $7 million, and new paint work. In December it was announced that the City was reviewing the finances of Urban Commons to determine whether the City of Long Beach had ‘received all revenues owed.’

Queen Mary’s original, professionally manned wireless radio room was removed when the ship was moored in Long Beach. In its place, an amateur radio room was created one deck above the original radio reception room, with some of the discarded original radio equipment used for display purposes. The amateur radio station, with the call sign W6RO (‘Whiskey Six Romeo Oscar’), relies on volunteers from a local amateur radio club. They staff the radio room during most public hours. The radios can also be used by other licensed amateur radio operators.

In honour of his over forty years of dedication to W6RO and Queen Mary, in November 2007 the Queen Mary Wireless Room was renamed as the Nate Brightman Radio Room. This was announced on 28 October 2007, at Brightman’s 90th. birthday party by Joseph Prevratil, former President and CEO of the Queen Mary.

The Ghosts of the Queen Mary

Following Queen Mary’s permanent docking in California, claims were made that the ship was haunted. In 2008, Time magazine included The Queen Mary among its ‘Top 10 Haunted Places’. One of the staterooms is alleged to be haunted by the spirit of a person supposedly murdered there. The Queen Mary Hotel promotes suite room B-340, a former third class cabin, as ‘notoriously haunted’.

The Queen Mary also operates a number of commercial tours that include haunted attraction experiences, such as Dark Harbour, which operates during the Halloween season, the ‘Haunted Encounters Tour’ and ‘Ghosts and Legends’ tour, promoted as featuring ‘terrifying original stories and characters based the ship’s well-known paranormal tales’.

Sceptical Inquirer writer John Champion has criticized the haunted tours, calling them:

‘A cynical exploitation of the space. Much effort
is put into promoting the ship as a ‘haunted
attraction’, while efforts to explain or preserve
the factual history of the ship are somehow
pushed to the wayside".

‘Day of the Fight’

So what else happened on the day that the card was posted?

Well, on the 26th. April 1951, the film ‘Day of the Fight’ premiered at New York’s Paramount Theatre, on the same program as the film ‘My Forbidden Past’. Frank Sinatra headlined the live stage show that day.

‘Day of the Fight’ is a short American documentary film financed and directed by Stanley Kubrick.

Shot in black-and-white, the film is based on an earlier photo feature he shot for Look magazine in 1949.

‘Day of the Fight’ shows Irish-American middleweight boxer Walter Cartier during the height of his career, on the 17th. April 1950, the day of a fight with middleweight Bobby James.

The film opens with a short section on boxing’s history and then follows Cartier through his day as he prepares for the 10 P.M. bout. Cartier eats breakfast in his West 12th. Street apartment in Greenwich Village, goes to early mass, and eats lunch at his favourite restaurant.

At 4 P.M., he starts preparations for the fight. By 8 P.M., he is waiting in his dressing room at Laurel Gardens in Newark, New Jersey, for the fight to begin. We then see the fight itself, which he wins in a short match.

A year after the fight, Walter Cartier made boxing history by knocking out Joe Rindone in the first forty-seven seconds of a match on the 16th. October 1951. Cartier had played some bit parts in movies before he appeared in ‘Day of the Fight’, and afterwards continued to appear occasionally in movies up until 1971, but he was most successful playing mild-mannered Private Claude Dillingham in the sitcom ‘The Phil Silvers Show’ for the 1955-1956 season.

Alexander Singer was a high school friend of Stanley Kubrick’s (they went to William Howard Taft High School in the Bronx), who acted as assistant director and a cameraman for this film.

Douglas Edwards, who narrated ‘Day of the Fight’ was a veteran radio and television newscaster. At this time, he was the anchor for the first daily television news program, on CBS, which would later be called Douglas Edwards with the News, and then The CBS Evening News. Edwards was replaced by Walter Cronkite in 1962, but remained a noted voice on CBS Radio news programs until he retired in 1988.

Kubrick and Singer used daylight-loading Eyemo cameras that take 100-foot spools of 35mm black-and-white film to shoot the fight, with Kubrick shooting hand-held (often from below) and Singer’s camera on a tripod. The 100-foot reels required constant reloading, and Kubrick did not catch the knock-out punch which ended the bout because he was reloading at the time. Singer did, however.

‘Day of the Fight’ is the first credit on composer Gerald Fried’s resumé. Kubrick did not pay him for his work on the film. Fried told the Guardian in 2018:

"He thought the very fact that my
doing the music for the film got me
into the profession was enough
payment’.

Fried, a childhood friend of Kubrick, later wrote the score for the director’s ‘Paths of Glory’ (1957) and three other films.

Although the original planned buyer of the picture went out of business, Kubrick was able to sell ‘Day of the Fight’ to RKO Pictures for $4,000, making a small profit of $100 above the $3,900 cost of making the film.

Posted by pepandtim on 2020-06-28 07:07:45

Tagged: , postcard , old , early , nostalgia , nostalgic , RMS , Queen , Mary , Salmon , Sevenoaks , 26/04/1951 , 1951 , Elliott , St. , Margaret’s , Carshalton , Road , Sutton , Surrey , vessel , 1936 , 1967 , Cunard , Line , John , Brown , 27QMA43 , Day , Fight , Stanley , Kubrick , Walter , Cartier , Long , Beach , California

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 1936, 1951, 1967, 26/04/1951, 27QMA43, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, beach, brown, California, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Carshalton, Cartier, Cunard, day, early, Elliott, Fight, for woodworking crafts, for woodworking tool, guide to woodworking, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, John, Kubrick, Line, Long, Margaret's, Mary, Money, Nautical, nk woodworking bathtub, nostalgia, nostalgic, oil can woodworking, Old, Pit, Postcard, Queen, RMS, Road, salmon, Sevenoaks, St., Stanley, surrey, Sutton, Vessel, Walter, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Dodge M37 U.S. Army truck HDR

September 13, 2020 by 4g3nd4

The photos in this album are of the property, possessions and projects of a fine older gentleman named Willie Shepherd.

He owns a LARGE property in Lookout, California. It is full of old tractors, cars, trucks, bulldozers and vehicles of varied and sundry description. My girlfriend Zoe bought a 1955 Carpenter (1954 GMC based) school bus from him, and he towed it the 17 miles to our Ranch with his old tractor on public roads:
www.youtube.com/watch?v=vihuX5mIFSA

Photos of the bus can be seen in another set of mine:
www.flickr.com/photos/darronb/sets/72157635098965316/

Willie also renovates and runs old steam engines. For years Willie has been showing and demonstrating his equipment for anyone interested.

A few years ago, Willie had a steam powered sawmill in operation, on which he sawed a log during his show.

This year (2014), Willie’s open house show is to be held on Father’s Day, Sunday, June 15.

You can telephone Willie at (530) 294-5141
Be patient, he’s a bit hard of hearing.
How to get to Willie’s Ranch

Almost all of the images in this set were 3-exp HDRs, processed with Photomatix. The camera was a Nikon D50.

Posted by Darron Birgenheier on 2014-05-23 00:09:38

Tagged: , Willie Shepherd , plow , outdoors , rusted , rusty , Lookout, California , “Big , Valley” , HDR , Photomatix , decrepit , “cast , iron” , ornate , vintage , antique , early , old , machinery , tractor , machines , handy , DIY , steam , long white beard , junk yard , scrap yard , metalworking , woodworking , agriculture , traction engine , two bottom plow , high desert , steam engine , Big Valley , cast iron , Old timer , High Dynamic Range , tools , farm dog , plowing , furrows , mouldboard , pine trees , field , pasture , scrap , hard working , steel wheels , wood-fired , dirty , filthy , folk art , crane boom , grill , grille , classic , cloudy sky , sagebrush , water wheel , Juniper , country life , collection , retirement , work shop , inventor , experimenter , work , working , hard work , diligent , GSSP , Golden State Star Party , bipolar photographer

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, agriculture, antique, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Army, Big Valley, bipolar photographer, California, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, cast iron, classic, cloudy sky, collection, country life, crane boom, decrepit, diligent, dirty, diy, Dodge, early, experimenter, farm dog, Field, filthy, folk art, for woodworking crafts, for woodworking tool, furrows, Golden State Star Party, Grill, grille, GSSP, guide to woodworking, handy, hard working, hard-work, HDR, high desert, High Dynamic Range, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, inventor, iron”, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Juniper, junk yard, long white beard, Lookout, M37, machinery, machines, metalworking, mouldboard, nk woodworking bathtub, oil can woodworking, Old, Old timer, ornate, outdoors, pasture, Photomatix, pine trees, plow, plowing, retirement, rusted, rusty, sagebrush, scrap, scrap yard, steam, steam engine, steel wheels, tools, traction engine, tractor, truck, two bottom plow, Valley”, vintage, water wheel, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, Willie Shepherd, wood-fired, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, work, work shop, working, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking, “Big, “cast Leave a comment
Post navigation
Older posts
Page1 Page2 Next →

Archives

  • February 2021
  • January 2021
  • December 2020
  • November 2020
  • October 2020
  • September 2020
  • August 2020
  • July 2020
  • June 2020
  • May 2020
  • April 2020
  • March 2020
  • February 2020
  • January 2020
  • December 2019
  • November 2019
  • October 2019
  • September 2019
  • August 2019
© 2021 Kitchen Inspiration • Built with GeneratePress