Skip to content

Kitchen Inspiration

Best Web For Your Kitchen Idea and Inspiration

  • Home
  • About
  • Contact
  • Cookie Policy
  • Copyright
  • Privacy
  • Sitemap
  • Terms
  • Kurma Ruthob Aisha Nikmat
  • Parfum Rawdha Kasturi

bridge

Sunday hits San Francisco

October 19, 2020 by 4g3nd4

Blogged in The Woodwork: Faking Long Exposure.
Use for my PHP Advent 2008: PHP without PHP.
Blogged in The Woodwork: PHP without PHP.

Sunday hits San Francisco
Treasure Island, San Francisco, California

Nikon D3, Nikkor 14-24mm f/2.8G, Gitzo G1228LVL tripod, Really Right Stuff BH-55 ballhead, Really Right Stuff PCL-II panoramic clamp
Aperture 2.0 (raw fine tuning, straighten) nik Color Efex Pro (graduated neutral density, polarization, pro contrast, contrast color range, brilliance/warmth) Photoshop (merge, heal)
2 exposures, 10 multi-exposures, 1/100sec @ f/18, iso200, 14mm (14mm)

____________________________________________________

Sunrise at Treasure Island

The weather was miserable on Saturday but on the off chance that it would clear up before sunrise, I drove down to Treasure Island and tried my hand at outdoor photography in over a year. For me, setting up in the pre-dawn for a photograph at sunrise is chicken soup for the soul.

The sun only broke through for a few minutes, but it was enough to take this photograph. By the time I jockeyed my camera for a satisfactory angle, I found out I was setting up in the water!

Since this lens cannot mount a ND filter, I stopped down as much as possible (f/22), set the ISO as low as possible (LO -1EV) and then took 10 exposures averaged in camera (multi-exposure mode), to emulate what a ND 1.2 would have done at f/16.

There is a small cheat here. In order to capture most of the sky and the horizon the way I wanted, I had to swipe part of the rocks in the foreground from a different (but identically set) exposure, technically this makes this a vertical panorama, but since the merge point is in the (multi-exposure integrated) water, I just blended them and avoided anything fancy.

There was an insane amount of dust on the senor and lens element. Because of this, I had to use the heal tool liberally. A digital grade ND brought back the rocks in the foreground and allowed the sky to be saturated and still hold contrast. The rest of the postprocessing was done to give it that postcard look and then toned back a small bit. u-points were used to keep the rock out of shadow and the buildings in North Beach (the only thing in direct reflected sunlight) from being totally blown out.

Click for original photograph (If you cannot view this, add me to your contacts and I’ll add you to my friends. If you are already a contact of mine then just jet me a message and I’ll fix your status.)

Posted by tychay on 2008-04-03 06:14:54

Tagged: , heal , Bay Area , digital graduated nd , equipment , descriptive places , camera , digital polarization , places , skyline , stock categories , California , tripod , outdoor , Nikkor , Apple Aperture , San Francisco , TransAmerica building , 14-24mm f/2.8G , digital brilliance/warmth , Northern California , image type , skyscraper , building , digital color contrast range , Nikon D3 , Treasure Island , camera accessories , bay , Photoshop , digital pro contrast , portrait orientation , multiple exposure , Bay Bridge , architecture , RRS BH-55 ballhead , post-processing , city , bridge , waterblur , nik Color Efex Pro , seashore , orientation , time , reflection , RRS PC-II pano-clamp , Gitzo G1228LVL , straighten adjustment , shooting traits , Apple Aperture 2.0 , United States , Really Right Stuff , clouds , water , morning , lens , photo specs , stitch , sky

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 14-24mm f/2.8G, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, Apple Aperture, Apple Aperture 2.0, Architecture, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Bay, Bay Area, Bay Bridge, bridge, Building, California, Camera, camera accessories, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, city, Clouds, descriptive places, digital brilliance/warmth, digital color contrast range, digital graduated nd, digital polarization, digital pro contrast, Equipment, for woodworking crafts, for woodworking tool, Francisco, Gitzo G1228LVL, guide to woodworking, heal, hits, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, image type, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Lens, Morning, multiple exposure, nik Color Efex Pro, nikkor, Nikon D3, nk woodworking bathtub, Northern California, oil can woodworking, orientation, outdoor, photo specs, photoshop, Places, portrait orientation, post-processing, Really Right Stuff, reflection, RRS BH-55 ballhead, RRS PC-II pano-clamp, San, San Francisco, seashore, shooting traits, sky, skyline, skyscraper, stitch, stock categories, straighten adjustment, Sunday, Time, TransAmerica building, Treasure Island, Tripod, United States, water, waterblur, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

MEANDER Yacht c. 1934 – False Creek

October 16, 2020 by 4g3nd4

Vancouver, BC Canada

The vessel was built in 1934 at W.R. Menchions Shipyard in Coal Harbour, located just east of where the Bayshore
Inn now stands. Although there is no record of her cost, amongst my Grandfather’s papers are notes of cost estimates of very similar vessels, and an educated guess would be about $24,000.

The yacht was commissioned on April 24, 1934 — that date is significant as the design drawings are dated October 1933, indicating barely six months from start to finish of the vessel, a remarkable feat even by today’s standards.

This classic double-ended yacht was stoutly built from the finest materials available: • Yellow cedar hull planking • Bent 2” x 3” white oak frames at 9” centres • Teak deck planking • Yellow cedar ceiling (inner planking)

She is powered by a six-cylinder Gardner 6L3 diesel engine, rated at 102 bhp at 800 rpm, which has been in continuous service ever since. Like many large yachts of the period, Meander was “impressed” by the Royal Canadian Navy in 1939 for coastal patrol duty, serving as HMCS Meander in the “Fisherman’s Reserve” during the Second World War.

In 1945, Meander was sold to Pacific International Airways, an apparent subsidiary of Pan Am Airlines based in Alaska.

In 1948, the boat was bought by Sydney & Walter Wilson and used as a charter yacht under the name of “Meander Charters Ltd.”

In 1950, Meander was bought by the United Church of Canada and from 1950 (or 1951) to 1963, Meander worked as the United Church Missionary Vessel Melvin Swartout II working up and down the West Coast of Vancouver Island, based initially out of Port Hardy until 1953 she was moved to Bamfield.

From 1963 to1972, Meander was owned by Frederick Alexander Menzies of West Vancouver who operated her as a charter yacht. On Mr. Menzies’ death, the yacht was bequeathed to his son Robert who appears to have sold it almost immediately.

In 1972, Meander was sold to Art and Norma Clements. The boat was purchased in 1975 by Hedley Rendell and Dennis Feroce. It was Dennis who wanted the boat and he was helped by Hedley with the purchase through his company.

For the past 37 years, Meander has been under Dennis’ care, and since 1995 her interior has been completely restored, greatly benefitting from the contributions of Dennis’ wife Jan Iliffe.

Dennis still lives aboard Meander with his wife, Jan. For many of the last 30 years, Meander has been operated as a charter yacht, but has also been their cozy and comfortable home. The 1975 purchase was a fortuitous thing for Meander as Dennis, a Master Woodworker, has maintained her in absolutely pristine condition and most importantly, maintained her in a manner faithful to her original 1930s vintage design. Jan has lent a very talented decorator’s touch to restoring and showing the boat off beautifully with refined paintwork, beautiful upholstery and fine artistic touches throughout.

This image is best viewed in Large screen.

Thank-you for your visit, and any faves or comments are always sincerely appreciated.
Sonja

Posted by SonjaPetersonPh♡tography on 2020-04-29 23:16:58

Tagged: , False Creek , False Creek Seawall , Downtown Vancouver , Vancouver , British Columbia , BC , Canada , Nikon , Nikon D5300 , Nikon 300mm , Nikon AF-S DX NIKKOR 18-300mm f/3.5-5.6G ED VR , Nikkor , Seawall , Inlet , Burrard Inlet , Burrard Street Bridge , Vessels , Marina , Boats , Granville Island Marina , Vesseks , MEANDER Yacht , circa. 1934 , Vintage Design , Yacht , Charter Yacht , MEANDER , City of Vancouver , Bridge , Crossing , Water Reflections , Reflections

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, BC, Boats, bridge, British Columbia, Burrard Inlet, Burrard Street Bridge, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Canada, Charter Yacht, circa. 1934, City of Vancouver, Creek, Crossing, Downtown Vancouver, False, False Creek, False Creek Seawall, for woodworking crafts, for woodworking tool, Granville Island Marina, guide to woodworking, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, Inlet, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Marina, MEANDER, MEANDER Yacht, nikkor, Nikon, Nikon 300mm, Nikon AF-S DX NIKKOR 18-300mm f/3.5-5.6G ED VR, Nikon D5300, nk woodworking bathtub, oil can woodworking, Reflections, Seawall, Vancouver, Vesseks, Vessels, Vintage Design, Water Reflections, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking, Yacht Leave a comment

Depot Street, Willis House, Melville Morton, Randall, Eugene F., 131 Depot Street, South Easton, MA, info, Easton Historical Society

October 8, 2020 by 4g3nd4

More information on this image is available at the Easton Historical Society in North Easton, MA.
www.flickr.com/photos/historicalimagesofeastonma/albums
,
The development by Oliver Ames and Sons Corporation of the factory and village land use in a rather organic manner with a mix work-related classes created an integrated geographic network. The housing on perimeter edge with factories and business affairs in the center creating the village concept in North Easton. Other important concepts were the Furnace Village Cemetery, Furnace Village Grammar School and the Furnace Village Store, which explains Furnace Village and other sections of Easton.
source: Massachusetts Historical Commission
,
South Easton Cemetery
This cemetery is situated above South Easton Village on the west side of Washington Street. It is a level tract of light sandy soil, has been planted with evergreen trees, and is neatly kept. The first interment here was that of Catherine Lothrop, wife of Thomas J. Johnson, who died at Newtonville, together with an infant son, on May 27, 1851, thirty-five years of age. In November of 1885, there can be counted two hundred and seventy-one graves, forty-four of which are unmarked, of these latter, however, many are new graves, to which headstones will probably be supplied. The following are names of most of those buried in these unmarked graves, Dean Ramsdell, Lizzie Ramsdell, and Emma, wife of Dean Ramsdell, Jr., Joseph Heath, a soldier, and Fred H. Greenleaf, a child of Fred Clapp, also one of Lucius Darling, of James Willis, of H. Y. Mitchell, of Fred C. Thayer, and of Warren Jones, two children of Eugene Willis and others of Martin Willis, Mrs. Carrie Kilburn and child, Rosanna, wife of Thomas James, Rebecca, wife of John Bailey, and the wife of John Bailey, Jr., Ella, wife of F. C. Thayer, Tyler F, Clapp, a soldier, Hattie Bosworth, Caleb S. Lothrop, Frank Nelson, and Asa Packard. There are a few others whose names are not easily ascertainable. Among the well-known citizens of other days whose graves are here may be mentioned those of E. J. W. Morse, Solomon W. Morse, Elijah Howard, Dr. Caleb Swan, Capt. Barzillai Dean, Lenard Williams, Capt. Milo Williams, Col. John Torrey, and John Bisbee, the latter well deserving the inscription upon his tombstone, – An honest man, the noblest work of God. –
source: History of Easton, William L. Chaffin, 1886
.
Description of Depot Street below
History of the South Easton and Eastondale Fire and Water District below
,
131 Depot Street
By 1917, the Melville Morton Willis House at 131 Depot Street was owned and occupied by Melville Morton, and Ada Theresa Landers Willis. In the early 1880s, Nathaniel W., a carriage painter, and Sara B. Mitchell Perry owned and resided on a four acre parcel at 123 Depot Street, with a house, shop, and barn. In 1886, the map of South Easton shows the parcel at 131 Depot Street as noted with the name, – N. W. Perry. – In 1889, Nathaniel W., and Sara B. Mitchell Perry sold a half-acre of land west of their house to Francis J. Smith, a cotton mill worker for one hundred and seventy-five dollars. In 1889, the Easton Massachusetts City Directory listed Francis J. Smith as an employee of the E. J. W. Morse & Company at Seven Central Street. In 1893, Francis J. Smith sold the parcel at 131 Depot Street to Horace Dow, and Susan E. Purinton residing at 122 Depot Street for two hundred dollars. In 1900, owning and residing at 122 Depot Street were Horace Dow, a wooden heel factory Treasurer, and his wife, Susan E. Purinton, with their son, Charles Fessenden Purinton, and Horace’s sister, Annie M. Purinton, and a servant, Kerrie B. Johnson, and a boarder, Walter Lovejoy, a bookkeeper. On May 7, 1902, Horace Dow Purinton passed away in Easton at the age of sixty-five, with his burial in the South Easton Cemetery. In 1911, Horace Dow, and Susan E. Purinton’s son, Charles Fessenden Purinton sold the property at 131 Depot Street to Melville Morton, and Ada Theresa Landers Willis, who were renting on Central Street. In 1900, Melville Morton Willis, a shoe laster, was living on Depot Street, not this house, with his parents, James Warren, a iron moulder, and Wealthy Clorinda Leonard Willis, and his three brothers, Fred Leonard, John D., and Benjamin C. Willis, and his sister, Edna Gertrude Willis. On March 8, 1902, Melville Morton Willis married Ada Theresa Landers in Easton, daughter of Robert and Ellen O’Leary Landers. In 1910, renting and residing on Central Street were Melville Morton, a shoe shop laster, and his wife, Ada Theresa Landers Willis, with their daughter, Doris Ellen Willis, and their son, Harold E. Willis. In 1917, the Brockton Massachusetts City Directory listed Melville Morton Willis, a shoemaker, residing with his wife, Ada Theresa Landers Willis on Depot Street, opposite Church Street. In 1920, owning and residing at 131 Central Street were Melville Morton, a shoe shop laster, and his wife, Ada Theresa Landers Willis, with their daughter, Doris Ellen Willis, and their son, Harold E. Willis. On October 29, 1922, Melville Morton Willis’ wife, Ada Theresa Landers Willis passed away in Easton at the age of forty-eight. On September 1, 1923, Melville Morton, and Ada Theresa Landers Willis’ daughter, Doris Ellen Willis married Ernest John Garbitt II in West Roxbury, son of Ernest John, and Annie Louisa Gurner Garbitt. In 1926, widowed Melville Morton Willis sold the property at 131 Depot Street to his daughter, Doris Ellen Willis Garbitt II, and her husband, Ernest John Garbitt II. In 1930, Eugene Frederick Randall, a toy factory woodworker, was residing on Pine Street with his parents, Frank Martin, a railroad signal operator, and Lillian M. Randall. In 1930, Esther Emma Darling was residing in Wolcott, Vermont with her parents, Vern Marcus, a dairy farmer, and Cassie Lemyra Boyce Darling. On May 6, 1936, Eugene Frederick Randall married Esther Emma Darling Randall in Merrimack, New Hampshire, daughter of Vern Marcus, and Cassie Lemyra Boyce Darling. In 1940, owning and residing at 131 Depot Street were Eugene Frederick, a carpenter, and Esther Emma Darling Randall, and their two sons, Raymond Franklin, and Robert Darling Randall, and their daughter, Roberta Mae Randall.
source: Easton Historical Society
source; Massachusetts Historical Commission
source: Ancestry
source: History of Easton, William L. Chaffin, 1886
source: Easton’s Neighborhoods, Edmund C. Hands, 1995
.
Early School Days in Eastondale, Edwin H. White, 1950s
The following is part of a paper that Edwin H. White presented to the Easton Historical Society in the 1950s.
In 1818, Asa Howard sold land for a school house at the intersection of Turnpike and Washington Streets, upon which a school house was built. In 1869, the building was moved near what is now Joseph Dardeno’s House at 390 Turnpike Street. (1950s) This was where my father attended school. Also in 1869, a second building was erected on this site. It has recently been torn down, but it was a sore spot to our neighborhood for several years. It was set afire several times, but true to their duty, our firefighters saved a part of the building each time. I understand that during the last fire, the State Inspector appeared while it was still burning and ordered the firemen to extinguish the fire. This was the building in which I first attended school at the age of six. The following are the names of the teachers in their order while I attended school in this building: Miss Henrietta Gilmore, William Springer. Miss Cathell, Miss Jessie Bird and Miss Mary Young. The janitor was one of the older boys, and it became my job for two years, from 1882 to 1884. I had to be there early in the morning to sweep the floor three times a week, start the fire, and heat the school room where the pupils were taught, some of them walking a mile from either direction. There were no buses to carry us and our ears and toes many days seemed frozen even though we were dressed warmly with heavy woolen or red flannel underclothing, woolen stockings, and scarves or tippets as they were called, all of which our mothers had knitted in the long hours of the evening. I also had to fill the wooden pails with fresh water every morning, one for the girls ante room and one for the boys. These pails of water were kept on a shelf over an old iron sink, and a single long handled dipper hung on a nail nearby. I often wonder where the germs were in those days that two dippers were sufficient for all the children. There was no well on the school grounds, and I had to go a distance to a neighbor’s old well sweep to fill the pails and return them to their proper place. Sometimes I had to fill the pails more than once if the children were unusually thirsty. However, the last year I was there, the Town dug a well on the school, and installed a cucumber pump, which made the job easier. For fear some of you may not know about a cucumber pump, it was a six inch square box. extending down into the well and about five feet above the well. A long handle attached allowed long strokes for pumping the water. The schoolhouse was heated by a big oblong wood burning stove in the cellar. This stove, for safety from fire, was built upon a stone foundation and the upper part was enclosed with brick up to the floor and to the register which was in the front of the school room. The smoke pipe came up through the register to the the of room and extended the length of the room to a chimney in the north end of the building suspended by wires attached to the ceiling. Many a one and one-half foot log have I put into that stove. I received twenty-six dollars and fifty cents a for the school year. That was enough for a suit of clothes, a hat, and a ticket for Dickerman’s Sunday School Excursion during summer vacation, a big annual event in those days. The building was about thirty by forty feet. Doors on each side, one for the girls and one for the boys, opened into entries where our outer wraps were left. These entries opened into a vestibule and here the register was located. This vestibule could be separated from the classroom by two sliding gates which could be locked when occasion required. The classroom itself was occupied by four rows of double desks, not open tops. Two pupils sat at each desk. Boys were on one side of the room and the girls on the other, but notes could get across the line sometimes. Long seats were built on both sides of the room, and these seats were used for recitation purposes. As classes were called by the teacher, the pupils left their seats and went in order to these long seats. Then, as called upon, each pupil would rise and recite. The hours were from 9 a.m. to 12 p.m., and I p.m. to 4 p.m., with fifteen minutes recess both morning and afternoon. On pleasant days, we were allowed to play in the rear. All grades were taught in this school, from the ABC’s to the fourth and fifth readers. Some of these books I have in my home. One is marked, Entered according to Act of Congress 1871. For the writing period, we were supplied with a lined blank book. Each page had a sample of writing at the top, and our lesson was to copy it. One day, hands were raised frantically. Teacher, there is something the matter with the ink. It was the janitor’s responsibility to keep the ink wells filled, and the teacher looked to him for an explanation, but he was as puzzled as the other children. The teacher boarded on Purchase Street at the home of Mr. Rankin who was on the school committee. He supplied the ink for this school, and after hearing the teacher’s story, he went to his cellar where the ink was stored, and found he had made a mistake and sent a bottle of boiled cider in place of the bottle of ink. The poor janitor had poured the cider in the ink wells, and as you can readily guess, the cider and the ink already in the ink wells did not mix well. And now about discipline. I do not remember that there were any very bad boys. Of course we had our fights and disagreements. A skunk sometimes found his way into the cellar and the school had to be closed. I would not care to tell you if the skunk got in there alone or if was aided by cellar windows being left open. I should like to speak again about the stove. As I think of it now, it was an interesting arrangement. The doors in front of the stove were lifted by chains. A tiny hole no larger than a screw hole was discovered, or made, in the floor near the desk of one of the boys, who attached a cord from this spot through the floor to the cellar, and far enough across to be attached to the outer housing doors, which were made of steel and had two handles. This boy could be studying apparently, and one of the most studious, when by pulling the rope under his desk, the doors which were hung on chains would drop down with a bang, and this noise would startle the teacher and children. She said, Janitor, I fear you did not close the stove doors properly. Please attend to it. But just as the janitor returned, the same thing happened again. But now the teacher caught glances from various parts of the room. This led her to the culprit and the rope. This school building was used until the new brick building of two rooms was erected on Pine Street and dedicated June, 1930. A third room-was later added. In our Eastondale building, we especially liked to watch the cattle being driven through the street, and the shepherd dog that accompanied the driver and helped to keep the drove in order. If they were going by at recess time, we forgot school and went along to help, only to return and find ourselves late. It was a common sight in those days to see cattle driven through the streets. They were being driven from the Brighton cattle mart and delivered to the respective buyers. In closing, I have a tale of how I was teased by some of the boys in the school. I took a pair of shoes one morning to the cobbler just below the school. They were to be retapped. Today we say resoled. That afternoon, the cobbler was seen trudging by with a side of sole leather on his back. A side was probably enough to sole twenty-five or thirty pairs of shoes. The boys said he had to get all that leather for my shoes. They really did razz me considerably as to the amount of leather required for my shoes.
,
Edwin C. White, following in the tradition of his grandfather and father, was President of Simpson Spring Company in 1967 until his retirement in 1988. For decades, Ed and his wife Evelyn (Lyn) lived in the second oldest house in Easton, the Benjamin Williams home at 539 Bay Road, which they totally restored. Ed and Lyn have been extremely active in the Easton community. Ed was the first president of the restored Easton Historical Society (1967-69), and facilitated many Antique Auto Meets at the Station. He was also the first Ames Free Library president to come from outside the Ames family, and was a trustee of the North Easton Savings Bank for 46 years, retiring as Chairman of the Board in 20I0. Lyn was one of the major spokespeople for saving Wheaton Farm, and provided the leadership for the creation of the Natural Resources Trust of Easton. (See History of Easton, Massachusetts: Volume Two, page 271.) She was also Executive Director of the Neponset River Watershed Association. Both Ed and Lyn have been active in Unity Church for many years. In 2001, the Lions Club presented the Whites the Outstanding Service Award, the highest award given. In addition, several years ago the Natural Resources Trust of Easton dedicated a bench on the foundation of the mansion of – Sheep Pasture – to Lyn and Ed White –Stewards of the Land.
source: Reminiscences, Early School Days in Eastondale, Edwin H. White, 1950s, Easton Historical Society
,
In the year 1915, a second district was established within the town of Easton known as the South Easton and Eastondale Fire and Water District. This district comprises a section of the town about 5 miles long and averaging a little over 1 mile in width lying along the easterly border of the town adjacent to Brockton and West Bridgewater. Its northerly limit is about 2 miles south of the boundary between Easton and Stoughton, and this limit extends from the boundary of the North Easton Village District to the boundary line of the city of Brockton. The North Easton Village District is supplied with water from wells situated in the valley of a tributary of the Coweeset River within the limits of the district. The South Easton and Eastondale Fire and Water District is supplied from separate works through an extension of the pipes of the city of Brockton. The arrangement of the two districts herein described leaves in the extreme northeasterly corner of the town of Easton an area about 2 miles long in a northerly and southerly direction and from miles in width which does not form a part of either district and is practically wholly cut off from the remaining portions of the town. This district, known as Unionville, is inhabited by about ninety families, and, in response to a petition of certain inhabitants thereof, the State Department of Health during the past year investigated the condition of the water supply in Unionville, as a result of which it was found that many of the wells in use were badly polluted, and the Department is informed also that many of them have failed during the dry seasons that have occurred in recent years.
source: Annual Report of the State Board of Health of Massachusetts, 1915
,
South Easton and Eastondale Fire and Water District
At the turn of the century, this section of Easton consisted of the Civil War monument area, including the Town Hall, the Evangelical Congregational Church, the Almshouse, and the Center School, with the one-story Easton Center Depot a little to the east. There were a number of farms along accessory roads like Purchase Street. The village area along Washington Street, from Morse’s square stucco house near the southeastern corner of the intersection of Washington and Grove (now Belmont) Streets to the South Easton Depot south of the Green. Sequasset area, now called Eastondale, included the Eastondale Depot.
Those who were not self-employed or employed in the South Easton/Eastondale area were apt to be workers in one of the many Brockton shoe factories. Transportation to their place of employment was by train via West Bridgewater and Matfield to Campello and locations north. Lighting was by oil, or a reasonable facsimile, since electricity was not available until the first decades of the twentieth century. Police protection was on an informal level and there were no physicians in the South Easton-Eastondale area. At this time each home had its own well and pump. The South Easton-Eastondale Fire and Water District was not organized until 1916. Fire protection was either by neighborhood assistance or had to come from North Easton or Brockton. Such was the case when the Rankin house at the duck farm burned. The duck farm, located on Purchase Street, was owned by James Rankin and employed a number of people. A large wagon load of crated duck, would be shipped each morning from the Easton Center railroad station to destinations throughout the United States. The farmers sold their products by horse and wagon with daily milk routes being serviced. The milk was sold by the quart measure from eight-quart cans kept cool by ice. Seasonal products, such as apples and vegetables, were also sold. Another provision ordered and delivered to the home was meat. South Easton was serviced by Henry Heath and his son, Alfred Heath, who slaughtered their own beef. They delivered on a weekly basis and in the early 1900s two pounds of beef cost approximately twenty-four cents. A large part of their meat business was in smoked meats. Mr. Heath had a large smoke house, and people came from all over the area to have hams and bacon smoked. Many farmers did their own butchering, but had no smoke house, so they brought their meats to the Heath Smoke House. The same kind of services were provided by Cyrus Alger, who had meats and vegetables at his place on Turnpike Street.
The Washington Street area contained the thread mills of the E. J. Morse Company, the post office, the general store operated for many years by the Horace Mitchell family, and the Grammar School (both the old and the new, built in 1903). Further south, at the Easton Green, was the very busy J. 0. Dean grist mill. In back of the mill was the Ross Heel Company which was owned by Mr. Dean’s son-in-law, Edwin Kennedy. This was also where the Puritan rollaway screens were made in the early 1900s. Further south, along Washington Street, were the blacksmith shop, the depot on the left, and a new and thriving company on the right, the Simpson Spring Company. There were several paint and varnish shops in the area, and thermometers were made by the Poole’s on Foundry Street. In the Eastondale area, grain, lumber, and daily provisions were available at James E. Howard and Sons Store. Originally his father, James M. Howard, had operated a store as part of his home on Pine Street before buying the two-and-a-half story structure on Turnpike Street. It was burnt on the evening of October 5, 1930, and it was replaced by a smaller one-story store built on the site and ready for operation by March, 1931, by members of a third generation of the Howard family. Just as the South Easton Post Office was housed in or adjacent to the general store on Washington Street, so also was the Eastondale post office, operated by the Howard family for approximately fifty-five years. Other businesses on Turnpike Street were poultry farms and livery stables.
Many of the residents attended the Evangelical Congregational Church at the CenteL Those in the southern part of Easton who were Catholic would travel by horse and wagon or train to North Easton and the Immaculate Conception Church. In Eastondale. those who did not attend the Congregational Church organized a Unitarian Society. For about fourteen years, until 1904 when the church on Turnpike Street was built, religious services and meetings, including church school classes, were held at the Grand Army of the Republic Hall. This Hall had been built in 1886 and was the site of many social affairs. The Grand Army of the Republic was very active with its annual winter fair being the popular attraction for young and old. Many dramatic presentations and dances were held at the Hall which was not torn down until !946. Many South Easton residents were also active members of the Harmony Grange on Bay Road in Furnace Village.
source, History of Easton, Massachusetts, Vol. II, M. McEntee, Easton Historical Society, ET AL, 1886-1974
source: Easton Historical Society
,
August 23, 1915. To the Board of Water Commissioners, South Easton and Eastondale Fire and Water District, Mr. William N. Howard, Chairman. Gentlemen: — The State Department of Health received from you on Aug. 14, 1915, the following application for the approval by this Department, under the provisions of chapter 232 of the Special Acts of the year 1915, of the taking and use of water from Silver Lake for the water supply of the South Easton and Eastondale Fire and Water District through a contract with the water commissioners of the city of Brockton made under the provisions of said act. In order to comply with the conditions of the special act of 1915, chapter 232 in relation to the South Easton and Eastondale Fire and Water District, it becomes necessary to secure a certificate of approval by the State Department of Health of the source of supply and location of dams, reservoir, wells, etc., in compliance with the section two of said act. The South Easton and Eastondale Fire and Water District is under contract with the city of Brockton, which city is furnishing the district with water from its regular supply which is Silver Lake, which source of supply has already been approved and is under constant inspection by the State Department of Health. The attorneys who are passing upon bonds require, however, that a certificate of approval from the State Department be furnished as the law states. The Department has considered the results of examinations of Silver Lake, the proposed source of supply, by the engineer of the Department and finds that the water is of good quality for domestic use and the supply adequate for the requirements of the South Easton and Eastondale Fire and Water District in addition to those of the city of Brockton and the towns now supplied by that city from Silver Lake. The State Department of Health hereby approves the use of water taken from Silver Lake and supplied through the works of the city of Brockton for the water supply of the South Easton and Eastondale Fire and Water District under the provisions of chapter 232 of the Special Acts of the year 1915.
source: Annual Report of the State Board of Health of Massachusetts, 1915
,
(1915) A new water district was established during the year in the town of Easton to supply the villages of South Easton and Eastondale. The supply is obtained from the works of the city of Brockton.
source: Annual Report of the State Board of Health of Massachusetts, 1915
,
In 1915, South Easton and Eastondale Fire and Water District connected to the Brockton water system, which pulled water from Silver Lake in Pembroke. A series of pipes were laid and connections made to houses on Washington, Depot, Turnpike, and Pine Streets. Maps of the district were drawn locating the water connections, identification of the resident’s properties. Illustrated plans of the homes and businesses that connected to the districts water supply. The fire equipment for the South Easton and Eastondale Fire and Water District was housed in a barn on the southeast corner of Depot and Washington Streets. In 1932, the Town of Easton appointed a fire chief to supervise all the town’s fire departments.
source: Massachusetts Historical Commission
,
Depot Street
Depot Street extends from the Bay road at the Furnace Village through the Centre, past the railroad station, through the Green and to the turnpike. Sections of it were laid out at different times ; that near the Centre is alluded to as early as 1716, and that part just east of the Green, in 1703. It was laid out from the Furnace Village to Black Brook in 1752 ; from the Centre to Black Brook it appears to have been relaid in 1838, and in 1885 it was widened. The extreme eastern end was added in 1848.
source: History of Easton, William L. Chaffin, 1886
,
Depot Street
The Eastondale section of Depot Street parallels the Queset River from Easton Green to the intersection with Turnpike Street, formerly a section of the Taunton and South Boston Turnpike. Although Depot Street was a section of the first road to be formally laid out in Eastondale in the last decade of the 17* century, very little residential development occurred along the road until the early 20th century.
source: Massachusetts Historical Commission

Posted by Historical Images of Easton, Massachusetts, Bristo on 2019-06-14 18:13:07

Tagged: , Center , Image , Maps , Places , Wall , Pond , North , Governor , History , Site , Easton , Massachusetts , Farm , House , Road , Commission , Interior , People , Village , Simpson , Historical , Society , Home , Main , Sites , Houses , Registry , Museum , Station , Out , Door , Bay , Property , Town , District , Bridge , Washington , Shovel , Rail , Furnace , Botanical , Fence , Shop , National , Historic , Index , Wooster , Flower , Spring , Asahel , Park , Garden , Coe , Bristol , Vintage , Ames

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, Ames, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Asahel, Bay, Botanical, bridge, Bristol, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Center, Coe, commission, Depot, District, door, Easton, Eugene, farm, Fence, flower, for woodworking crafts, for woodworking tool, Furnace, garden, Governor, guide to woodworking, HIstoric, historical, History, hobbies like woodworking, home, house, houses, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, image, Index, info, interior, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Main, Maps, Massachusetts, Melville, Morton, Museum, National, nk woodworking bathtub, North, oil can woodworking, Out, Park, people, Places, pond, Property, Rail, Randall, Registry, Road, shop, Shovel, Simpson, Site, Sites, Society, South, spring, Station, STREET, Town, Village, vintage, Wall, Washington, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, Willis, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, Wooster, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Entering Civilization

October 8, 2020 by 4g3nd4

Transition from the soft shaped world of nature into the hard shaped industrial world… somehow they go well together 🙂

About:
This was shot a bit further up the Lysakerelven river, than this shot from Saturday. Fåbro Fossen or Granfossen waterfall that was utilized for industrial purposes for centuries, begins in the distance.

Discussion
Comments and critique are as always welcome. Let me hear your opinion, why do you like this, or even better, how would you approach this scenery. Give me your thoughts… not just a Wow!… only then I can improve :))

uberfischer and Gunnar Bangsmoen have spotted a halo in this shot….!!!! Hmmmm, not good :))))) They want to see a larger version to judge this matter better :))
So I uploaded a larger version (blurred foreground 🙂

What do think? Is there a halo in there…

Kane feels that the glow on the water might be over powering. I used a circular polarizer filter to reduce reflections, that’s why the river bottom is visible in the front. But I find it hard to reduce reflections in big surfaces when I’m shooting at 10mm (16mm fullframe eq).
Any suggestions?

Thanks
In and out of Explore, thanks to all for comments and faves :))

Use
This photo is Copyrighted 2010 © Morten Prom. All rights reserved.

Facebook Site | Contact & Portfolio | Twitter | Blog | Print Sales

Posted by mortenprom on 2009-04-02 16:11:01

Tagged: , 2009 , architecture , b+w110 , blue , bridge , brown , color , day , fence , forest , granite , gray , ice , landscape , light , long exposure , march , mortenprom , natural density filter , nature , nd 1000x , nd 3.0 , nd1000 , norge , norway , oslo , plant , polarizer filter , rails , reflection , river , sigma 10-20mm , snow , stone , stream , sunny , tree , water , wet , white , wideangel , winter , wood , wood work , wideangle , explore , Noreg , Scandinavia , Skandinavia , Noorwegen , Noruega , Norwegen , Skandinavien , Canon EOS 40D

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 2009, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, Architecture, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, b+w110, Blue, bridge, brown, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Canon EOS 40D, Civilization, color, day, Entering, explore, Fence, for woodworking crafts, for woodworking tool, forest, Granite, gray, guide to woodworking, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, ice, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Landscape, light, Long exposure, March, mortenprom, natural density filter, Nature, nd 1000x, nd 3.0, ND1000, nk woodworking bathtub, Noorwegen, Noreg, Norge, Noruega, Norway, Norwegen, oil can woodworking, oslo, plant, polarizer filter, rails, reflection, river, Scandinavia, sigma 10-20mm, Skandinavia, Skandinavien, snow, Stone, stream, sunny, tree, water, wet, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, White, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, wideangel, wideangle, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, Winter, Wood, Wood Work, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Barmouth bridge. The foot path which runs alongside the railway on the historic bridge.

September 23, 2020 by 4g3nd4

Barmouth bridge is the longest wooden railway bridge in Great Britian.
A bit of information from the BBC
Calls have been made for a 146-year-old railway bridge to be listed as a World Heritage Site.

Barmouth Town Council plans to hold talks with historic monuments agency Cadw and Network Rail, which owns the bridge across the Mawddach estuary.

The 900m-long (2,953 ft) bridge carries the Cambrian Coast Railway from Machynlleth to Pwllheli.

Network Rail
•The line onwards from Barmouth to Pwllheli, which suffered the most devastating damage, will take longer to repair and we are currently working on a programme to re-open fully by mid-May 2014.

It has been noted that the condition of the bridge is scruffy. Some woodwork has been done but the steel sections are now showing its age and not in a good way.

Posted by Rosie Girl1 on 2014-04-27 09:58:46

Tagged: , Barmouth , Barmouth Bridge , Bridge , Railway , railway bridge , Cambrian , Cambrian Railway line , cambrian coast , cambrian coast line , Buildings , Wales , Welsh heritage , Welsh seaside , welsh coast , West Wales , West , Welsh Seaside Town , Welsh , heritage , historic , Old Bridge , Famous Bridge , Historic Bridge , Beautiful Bridge , UK , United Kindom , Great Britian , GB , Gwynedd , blue sky , sunny day , Wooden , Mawddach Estuary , abermaw , The Seaside , 2014 , Rosie Girl , A580 , April , The Rosie Girl , Rosie Girl1

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 2014, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, A580, abermaw, April, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Barmouth, Barmouth Bridge, Beautiful Bridge, blue sky, bridge, buildings, Cambrian, cambrian coast, cambrian coast line, Cambrian Railway line, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Famous Bridge, foot, for woodworking crafts, for woodworking tool, GB, Great Britian, guide to woodworking, Gwynedd, Heritage, HIstoric, Historic Bridge, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Mawddach Estuary, nk woodworking bathtub, oil can woodworking, Old Bridge, path, railway, railway bridge, Rosie Girl, Rosie Girl1, runs, sunny day, The Rosie Girl, The Seaside, UK, United Kindom, wales, welsh, welsh coast, Welsh heritage, Welsh seaside, Welsh Seaside Town, West, West Wales, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, Wooden, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Walking Bridge, former rail line on Old Collins Company property, Collinsville CT (color)

September 21, 2020 by 4g3nd4

Walking Bridge in Collinsville, Connecticut.

Collinsville is located along the banks of the Farmington River, in the southeast corner of the Town of Canton, bordered by the towns of Avon, Farmington and Burlington. In 1826, Samuel Watkinson Collins, age 24, his brother David, age 21, and their wealthy cousin, William Wells purchased a sawmill property along the Farmington River and began mass producing high quality axes and selling them wholesale throughout the world. The Collins Company constructed housing for its employees, as well as stores, a church, bank and hotel. In the 1920’s, the Company owned as many as 190 houses in Collinsville. The first fire department was organized to protect the factory and its properties in Collinsville and the building and equipment was later donated to the Town of Canton’s volunteer fire department.
The Collins product line grew to include 1,300 types of edge tools, including axes, adzes, machetes, hatchets, picks, knives, swords and bayonets. The Company built dams on the river to produce hydroelectric power to run their production and situated buildings strategically along raceways and turbines to take advantage of this source of water power. In 1966, after 140 years in business, the Collins Company closed its doors, due in part to losses experienced in the devastating Flood of 1955 and changing technologies and economies. Today, about 26 of the original 50+ factory buildings remain and are leased by a variety of tenants, such as; a multi-dealer antiques company, small offices, artist studios, woodworkers and metal workers. The former rail line, which Sam Collins brought to Town, has been converted to a walking and biking trail which connects to several area towns.

Source: www.visitcollinsville.com/visitcollinsville_002.htm

Posted by Ipp14 – www.stephenippolitophoto.com on 2013-07-18 01:06:11

Tagged: , Collinsville , CT , Collins , Company , Connecticut , Bridge , hartford , hdr

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, bridge, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Collins, Collinsville, color, Company, Connecticut, CT, for woodworking crafts, for woodworking tool, guide to woodworking, Hartford, HDR, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Line, nk woodworking bathtub, oil can woodworking, Property, Rail, Walking, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Godnow Bridge

August 25, 2020 by 4g3nd4

66074 approaches the reverse curves of Godnow Bridge with the 4R53 1355 Drax to Immingham biomass empties.

The railway here is on raised ground between the Stainforth and Keadby canal (just visible on the far side of the track), and drainage ditches, which all run parallel with the railway.

There is a very attractive ground level gate box here, which replaced the original signal box in the year 2000. It’s quite an attractive building too, incorporating some of the decorative woodwork of the original box.

13th March 2020.

Posted by Blaydon52C on 2020-03-19 16:21:06

Tagged: , DB Schenker , DBS , Class 66 , 66074 , 4R53 , Godnow , Bridge , Railway , Rail , Railways , Railfreight , Railroad , Trains , Train , Transport , Locomotive , Locomotives , Loco , Locomotion , Dra , Biomass , Lincolnshire , North , Crowle , Scunthorpe , Althorpe

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 4R53, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 66074, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, Althorpe, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Biomass, bridge, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Class 66, Crowle, DB Schenker, DBS, Dra, for woodworking crafts, for woodworking tool, Godnow, guide to woodworking, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Lincolnshire, Loco, Locomotion, Locomotive, Locomotives, nk woodworking bathtub, North, oil can woodworking, Rail, Railfreight, Railroad, railway, Railways, Scunthorpe, Train, Trains, Transport, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Oregon Garden Bridge 2299 C

August 21, 2020 by 4g3nd4

Small Wooden Bridge at the Oregon Garden in Silverton, Oregon

Posted by jim.choate59 on 2017-04-19 02:57:16

Tagged: , Oregon Garden , Silverton , bridge , wood , worn wood , abstract , cracks , woodworking , pattern , nail , jchoate , texture , saw

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, abstract, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, bridge, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, cracks, for woodworking crafts, for woodworking tool, garden, guide to woodworking, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, jchoate, nail, nk woodworking bathtub, oil can woodworking, Oregon, Oregon Garden, pattern, saw, Silverton, texture, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, Wood, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, worn wood, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Depot Street, Randall House, Frank M., 86 Depot Street, Eastondale,, MA, info, Easton Historical Society

August 19, 2020 by 4g3nd4

More information on this image is available at the Easton Historical Society in North Easton, MA.
www.flickr.com/photos/historicalimagesofeastonma/albums
,
The development by Oliver Ames and Sons Corporation of the factory and village land use in a rather organic manner with a mix work-related classes created an integrated geographic network. The housing on perimeter edge with factories and business affairs in the center creating the village concept in North Easton. Other important concepts were the Furnace Village Cemetery, Furnace Village Grammar School and the Furnace Village Store, which explains Furnace Village and other sections of Easton.
source: Massachusetts Historical Commission

South Easton Cemetery
This cemetery is situated above South Easton Village on the west side of Washington Street. It is a level tract of light sandy soil, has been planted with evergreen trees, and is neatly kept. The first interment here was that of Catherine Lothrop, wife of Thomas J. Johnson, who died at Newtonville, together with an infant son, on May 27, 1851, thirty-five years of age. In November of 1885, there can be counted two hundred and seventy-one graves, forty-four of which are unmarked, of these latter, however, many are new graves, to which headstones will probably be supplied. The following are names of most of those buried in these unmarked graves, Dean Ramsdell, Lizzie Ramsdell, and Emma, wife of Dean Ramsdell, Jr., Joseph Heath, a soldier, and Fred H. Greenleaf, a child of Fred Clapp, also one of Lucius Darling, of James Willis, of H. Y. Mitchell, of Fred C. Thayer, and of Warren Jones, two children of Eugene Willis and others of Martin Willis, Mrs. Carrie Kilburn and child, Rosanna, wife of Thomas James, Rebecca, wife of John Bailey, and the wife of John Bailey, Jr., Ella, wife of F. C. Thayer, Tyler F, Clapp, a soldier, Hattie Bosworth, Caleb S. Lothrop, Frank Nelson, and Asa Packard. There are a few others whose names are not easily ascertainable. Among the well-known citizens of other days whose graves are here may be mentioned those of E. J. W. Morse, Solomon W. Morse, Elijah Howard, Dr. Caleb Swan, Capt. Barzillai Dean, Lenard Williams, Capt. Milo Williams, Col. John Torrey, and John Bisbee, the latter well deserving the inscription upon his tombstone, – An honest man, the noblest work of God. –
source: History of Easton, William L. Chaffin, 1886

Description of Depot Street below
History of the South Easton and Eastondale Fire and Water District below
,
86 Depot Street
In 1930, the Frank Martin Randall House at 86 Depot Street was owned and occupied by Frank Martin, and Lillian Janet Soule Randall. In 1880, Frank Martin Randall was residing in Easton with his parents, Fred L., a shoe manufacturer, and his wife, Elmira L. Randall, and his sister, Edith M. Randall, and Frank’s Uncle, Mitchell L. Randall, a shoe manufacturer. In 1900, Frank Martin Randall, a railroad station agent, was residing on Washington Street with his parents, Fred L., a shoe heel manufacturer, and his wife, Elmira L. Randall, and his brother, Channing Clifton Randall, a shoe shop worker ,and his two sisters, Florence Louise, and Edith May Randall, a teacher. On January 1, 1903, Frank Martin Randall married Lillian Janet Soule in Easton, daughter of Nelson P., and Lucy Heath Soule. In 1910, owning and residing on Washington Street were Frank Martin, a railroad station agent, and Lillian Janet Soule Randall, with their daughter, Charlotte M. Randall, and their son, Eugene Frederick Randall. In 1917, the Easton Massachusetts City Directory listed Frank Martin Randall, a South Easton Rail Road Station agent, residing with his wife, Lillian Janet Soule Randall on Depot Street, near Washington Street. In 1920, owning and residing at Washington Street were Frank Martin, a railroad station agent, and Lillian Janet Soule Randall, with their daughter, Charlotte M. Randall, and their son, Eugene Frederick Randall. In 1930, owning and residing at 86 Depot Street were Frank Martin, a railroad signal operator, and Lillian Janet Soule Randall, with their son, Eugene Frederick Randall, a toy factory woodworker. In 1940, residing at 86 Depot Street were Frank Martin, a railroad station agent, and Lillian Janet Soule Randall.
source; Massachusetts Historical Commission
source: Easton Historical Society
source: Ancestry
source: History of Easton, William L. Chaffin, 1886
source: Easton’s Neighborhoods, Edmund C. Hands, 1995
.
Early School Days in Eastondale, Edwin H. White, 1950s
The following is part of a paper that Edwin H. White presented to the Easton Historical Society in the 1950s.
In 1818, Asa Howard sold land for a school house at the intersection of Turnpike and Washington Streets, upon which a school house was built. In 1869, the building was moved near what is now Joseph Dardeno’s House at 390 Turnpike Street. (1950s) This was where my father attended school. Also in 1869, a second building was erected on this site. It has recently been torn down, but it was a sore spot to our neighborhood for several years. It was set afire several times, but true to their duty, our firefighters saved a part of the building each time. I understand that during the last fire, the State Inspector appeared while it was still burning and ordered the firemen to extinguish the fire. This was the building in which I first attended school at the age of six. The following are the names of the teachers in their order while I attended school in this building: Miss Henrietta Gilmore, William Springer. Miss Cathell, Miss Jessie Bird and Miss Mary Young. The janitor was one of the older boys, and it became my job for two years, from 1882 to 1884. I had to be there early in the morning to sweep the floor three times a week, start the fire, and heat the school room where the pupils were taught, some of them walking a mile from either direction. There were no buses to carry us and our ears and toes many days seemed frozen even though we were dressed warmly with heavy woolen or red flannel underclothing, woolen stockings, and scarves or tippets as they were called, all of which our mothers had knitted in the long hours of the evening. I also had to fill the wooden pails with fresh water every morning, one for the girls ante room and one for the boys. These pails of water were kept on a shelf over an old iron sink, and a single long handled dipper hung on a nail nearby. I often wonder where the germs were in those days that two dippers were sufficient for all the children. There was no well on the school grounds, and I had to go a distance to a neighbor’s old well sweep to fill the pails and return them to their proper place. Sometimes I had to fill the pails more than once if the children were unusually thirsty. However, the last year I was there, the Town dug a well on the school, and installed a cucumber pump, which made the job easier. For fear some of you may not know about a cucumber pump, it was a six inch square box. extending down into the well and about five feet above the well. A long handle attached allowed long strokes for pumping the water. The schoolhouse was heated by a big oblong wood burning stove in the cellar. This stove, for safety from fire, was built upon a stone foundation and the upper part was enclosed with brick up to the floor and to the register which was in the front of the school room. The smoke pipe came up through the register to the the of room and extended the length of the room to a chimney in the north end of the building suspended by wires attached to the ceiling. Many a one and one-half foot log have I put into that stove. I received twenty-six dollars and fifty cents a for the school year. That was enough for a suit of clothes, a hat, and a ticket for Dickerman’s Sunday School Excursion during summer vacation, a big annual event in those days. The building was about thirty by forty feet. Doors on each side, one for the girls and one for the boys, opened into entries where our outer wraps were left. These entries opened into a vestibule and here the register was located. This vestibule could be separated from the classroom by two sliding gates which could be locked when occasion required. The classroom itself was occupied by four rows of double desks, not open tops. Two pupils sat at each desk. Boys were on one side of the room and the girls on the other, but notes could get across the line sometimes. Long seats were built on both sides of the room, and these seats were used for recitation purposes. As classes were called by the teacher, the pupils left their seats and went in order to these long seats. Then, as called upon, each pupil would rise and recite. The hours were from 9 a.m. to 12 p.m., and I p.m. to 4 p.m., with fifteen minutes recess both morning and afternoon. On pleasant days, we were allowed to play in the rear. All grades were taught in this school, from the ABC’s to the fourth and fifth readers. Some of these books I have in my home. One is marked, Entered according to Act of Congress 1871. For the writing period, we were supplied with a lined blank book. Each page had a sample of writing at the top, and our lesson was to copy it. One day, hands were raised frantically. Teacher, there is something the matter with the ink. It was the janitor’s responsibility to keep the ink wells filled, and the teacher looked to him for an explanation, but he was as puzzled as the other children. The teacher boarded on Purchase Street at the home of Mr. Rankin who was on the school committee. He supplied the ink for this school, and after hearing the teacher’s story, he went to his cellar where the ink was stored, and found he had made a mistake and sent a bottle of boiled cider in place of the bottle of ink. The poor janitor had poured the cider in the ink wells, and as you can readily guess, the cider and the ink already in the ink wells did not mix well. And now about discipline. I do not remember that there were any very bad boys. Of course we had our fights and disagreements. A skunk sometimes found his way into the cellar and the school had to be closed. I would not care to tell you if the skunk got in there alone or if was aided by cellar windows being left open. I should like to speak again about the stove. As I think of it now, it was an interesting arrangement. The doors in front of the stove were lifted by chains. A tiny hole no larger than a screw hole was discovered, or made, in the floor near the desk of one of the boys, who attached a cord from this spot through the floor to the cellar, and far enough across to be attached to the outer housing doors, which were made of steel and had two handles. This boy could be studying apparently, and one of the most studious, when by pulling the rope under his desk, the doors which were hung on chains would drop down with a bang, and this noise would startle the teacher and children. She said, Janitor, I fear you did not close the stove doors properly. Please attend to it. But just as the janitor returned, the same thing happened again. But now the teacher caught glances from various parts of the room. This led her to the culprit and the rope. This school building was used until the new brick building of two rooms was erected on Pine Street and dedicated June, 1930. A third room-was later added. In our Eastondale building, we especially liked to watch the cattle being driven through the street, and the shepherd dog that accompanied the driver and helped to keep the drove in order. If they were going by at recess time, we forgot school and went along to help, only to return and find ourselves late. It was a common sight in those days to see cattle driven through the streets. They were being driven from the Brighton cattle mart and delivered to the respective buyers. In closing, I have a tale of how I was teased by some of the boys in the school. I took a pair of shoes one morning to the cobbler just below the school. They were to be retapped. Today we say resoled. That afternoon, the cobbler was seen trudging by with a side of sole leather on his back. A side was probably enough to sole twenty-five or thirty pairs of shoes. The boys said he had to get all that leather for my shoes. They really did razz me considerably as to the amount of leather required for my shoes.
,
Edwin C. White, following in the tradition of his grandfather and father, was President of Simpson Spring Company in 1967 until his retirement in 1988. For decades, Ed and his wife Evelyn (Lyn) lived in the second oldest house in Easton, the Benjamin Williams home at 539 Bay Road, which they totally restored. Ed and Lyn have been extremely active in the Easton community. Ed was the first president of the restored Easton Historical Society (1967-69), and facilitated many Antique Auto Meets at the Station. He was also the first Ames Free Library president to come from outside the Ames family, and was a trustee of the North Easton Savings Bank for 46 years, retiring as Chairman of the Board in 20I0. Lyn was one of the major spokespeople for saving Wheaton Farm, and provided the leadership for the creation of the Natural Resources Trust of Easton. (See History of Easton, Massachusetts: Volume Two, page 271.) She was also Executive Director of the Neponset River Watershed Association. Both Ed and Lyn have been active in Unity Church for many years. In 2001, the Lions Club presented the Whites the Outstanding Service Award, the highest award given. In addition, several years ago the Natural Resources Trust of Easton dedicated a bench on the foundation of the mansion of – Sheep Pasture – to Lyn and Ed White –Stewards of the Land.
source: Reminiscences, Early School Days in Eastondale, Edwin H. White, 1950s, Easton Historical Society
,
South Easton and Eastondale Fire and Water District
At the turn of the century, this section of Easton consisted of the Town Hall, the Evangelical Congregational Church, the Almshouse, and the Center School, with the one-story Easton Center Depot a little to the east. There were a number of farms along accessory roads like Purchase Street. The village area along Washington Street, from Morse’s square stucco house near the southeastern corner of the intersection of Washington and Grove (now Belmont) Streets to the South Easton Depot south of the Green. Sequasset area, now called Eastondale, included the Eastondale Depot.
Those who were not self-employed or employed in the South Easton/Eastondale area were apt to be workers in one of the many Brockton shoe factories. Transportation to their place of employment was by train via West Bridgewater and Matfield to Campello and locations north. Lighting was by oil, or a reasonable facsimile, since electricity was not available until the first decades of the twentieth century. Police protection was on an informal level and there were no physicians in the South Easton-Eastondale area. At this time each home had its own well and pump. The South Easton-Eastondale Fire and Water District was not organized until 1916. Fire protection was either by neighborhood assistance or had to come from North Easton or Brockton. Such was the case when the Rankin house at the duck farm burned. The duck farm, located on Purchase Street, was owned by James Rankin and employed a number of people. A large wagon load of crated duck, would be shipped each morning from the Easton Center railroad station to destinations throughout the United States. The farmers sold their products by horse and wagon with daily milk routes being serviced. The milk was sold by the quart measure from eight-quart cans kept cool by ice. Seasonal products, such as apples and vegetables, were also sold. Another provision ordered and delivered to the home was meat. South Easton was serviced by Henry Heath and his son, Alfred Heath, who slaughtered their own beef. They delivered on a weekly basis and in the early 1900s two pounds of beef cost approximately twenty-four cents. A large part of their meat business was in smoked meats. Mr. Heath had a large smoke house, and people came from all over the area to have hams and bacon smoked. Many farmers did their own butchering, but had no smoke house, so they brought their meats to the Heath Smoke House. The same kind of services were provided by Cyrus Alger, who had meats and vegetables at his place on Turnpike Street.
The Washington Street area contained the thread mills of the E. J. Morse Company, the post office, the general store operated for many years by the Horace Mitchell family, and the Grammar School (both the old and the new, built in 1903). Further south, at the Easton Green, was the very busy J. 0. Dean grist mill. In back of the mill was the Ross Heel Company which was owned by Mr. Dean’s son-in-law, Edwin Kennedy. This was also where the Puritan rollaway screens were made in the early 1900s. Further south, along Washington Street, were the blacksmith shop, the depot on the left, and a new and thriving company on the right, the Simpson Spring Company. There were several paint and varnish shops in the area, and thermometers were made by the Poole’s on Foundry Street. In the Eastondale area, grain, lumber, and daily provisions were available at James E. Howard and Sons Store. Originally his father, James M. Howard, had operated a store as part of his home on Pine Street before buying the two-and-a-half story structure on Turnpike Street. It was burnt on the evening of October 5, 1930, and it was replaced by a smaller one-story store built on the site and ready for operation by March, 1931, by members of a third generation of the Howard family. Just as the South Easton Post Office was housed in or adjacent to the general store on Washington Street, so also was the Eastondale post office, operated by the Howard family for approximately fifty-five years. Other businesses on Turnpike Street were poultry farms and livery stables.
Many of the residents attended the Evangelical Congregational Church at the CenteL Those in the southern part of Easton who were Catholic would travel by horse and wagon or train to North Easton and the Immaculate Conception Church. In Eastondale. those who did not attend the Congregational Church organized a Unitarian Society. For about fourteen years, until 1904 when the church on Turnpike Street was built, religious services and meetings, including church school classes, were held at the Grand Army of the Republic Hall. This Hall had been built in 1886 and was the site of many social affairs. The Grand Army of the Republic was very active with its annual winter fair being the popular attraction for young and old. Many dramatic presentations and dances were held at the Hall which was not torn down until !946. Many South Easton residents were also active members of the Harmony Grange on Bay Road in Furnace Village.
source, History of Easton, Massachusetts, Vol. II, M. McEntee, Easton Historical Society, ET AL, 1886-1974
source: Easton Historical Society
,
In the year 1915, a second district was established within the town of Easton known as the South Easton and Eastondale Fire and Water District. This district comprises a section of the town about 5 miles long and averaging a little over 1 mile in width lying along the easterly border of the town adjacent to Brockton and West Bridgewater. Its northerly limit is about 2 miles south of the boundary between Easton and Stoughton, and this limit extends from the boundary of the North Easton Village District to the boundary line of the city of Brockton. The North Easton Village District is supplied with water from wells situated in the valley of a tributary of the Coweeset River within the limits of the district. The South Easton and Eastondale Fire and Water District is supplied from separate works through an extension of the pipes of the city of Brockton. The arrangement of the two districts herein described leaves in the extreme northeasterly corner of the town of Easton an area about 2 miles long in a northerly and southerly direction and from miles in width which does not form a part of either district and is practically wholly cut off from the remaining portions of the town. This district, known as Unionville, is inhabited by about ninety families, and, in response to a petition of certain inhabitants thereof, the State Department of Health during the past year investigated the condition of the water supply in Unionville, as a result of which it was found that many of the wells in use were badly polluted, and the Department is informed also that many of them have failed during the dry seasons that have occurred in recent years.
source: Annual Report of the State Board of Health of Massachusetts, 1915
,
August 23, 1915. To the Board of Water Commissioners, South Easton and Eastondale Fire and Water District, Mr. William N. Howard, Chairman. Gentlemen: — The State Department of Health received from you on Aug. 14, 1915, the following application for the approval by this Department, under the provisions of chapter 232 of the Special Acts of the year 1915, of the taking and use of water from Silver Lake for the water supply of the South Easton and Eastondale Fire and Water District through a contract with the water commissioners of the city of Brockton made under the provisions of said act. In order to comply with the conditions of the special act of 1915, chapter 232 in relation to the South Easton and Eastondale Fire and Water District, it becomes necessary to secure a certificate of approval by the State Department of Health of the source of supply and location of dams, reservoir, wells, etc., in compliance with the section two of said act. The South Easton and Eastondale Fire and Water District is under contract with the city of Brockton, which city is furnishing the district with water from its regular supply which is Silver Lake, which source of supply has already been approved and is under constant inspection by the State Department of Health. The attorneys who are passing upon bonds require, however, that a certificate of approval from the State Department be furnished as the law states. The Department has considered the results of examinations of Silver Lake, the proposed source of supply, by the engineer of the Department and finds that the water is of good quality for domestic use and the supply adequate for the requirements of the South Easton and Eastondale Fire and Water District in addition to those of the city of Brockton and the towns now supplied by that city from Silver Lake. The State Department of Health hereby approves the use of water taken from Silver Lake and supplied through the works of the city of Brockton for the water supply of the South Easton and Eastondale Fire and Water District under the provisions of chapter 232 of the Special Acts of the year 1915.
source: Annual Report of the State Board of Health of Massachusetts, 1915
,
(1915) A new water district was established during the year in the town of Easton to supply the villages of South Easton and Eastondale. The supply is obtained from the works of the city of Brockton.
source: Annual Report of the State Board of Health of Massachusetts, 1915
,
In 1915, South Easton and Eastondale Fire and Water District connected to the Brockton water system, which pulled water from Silver Lake in Pembroke. A series of pipes were laid and connections made to houses on Washington, Depot, Turnpike, and Pine Streets. Maps of the district were drawn locating the water connections, identification of the resident’s properties. Illustrated plans of the homes and businesses that connected to the districts water supply. The fire equipment for the South Easton and Eastondale Fire and Water District was housed in a barn on the southeast corner of Depot and Washington Streets. In 1932, the Town of Easton appointed a fire chief to supervise all the town’s fire departments.
source: Massachusetts Historical Commission
,
Depot Street
Depot Street extends from the Bay road at the Furnace Village through the Centre, past the railroad station, through the Green and to the turnpike. Sections of it were laid out at different times ; that near the Centre is alluded to as early as 1716, and that part just east of the Green, in 1703. It was laid out from the Furnace Village to Black Brook in 1752 ; from the Centre to Black Brook it appears to have been relaid in 1838, and in 1885 it was widened. The extreme eastern end was added in 1848.
source: History of Easton, William L. Chaffin, 1886
,
Depot Street
The Eastondale section of Depot Street parallels the Queset River from Easton Green to the intersection with Turnpike Street, formerly a section of the Taunton and South Boston Turnpike. Although Depot Street was a section of the first road to be formally laid out in Eastondale in the last decade of the 17* century, very little residential development occurred along the road until the early 20th century.
source: Massachusetts Historical Commission

Posted by Historical Images of Easton, Massachusetts, Bristo on 2015-05-11 19:40:22

Tagged: , Eastondale , Easton , Massachusetts , Bristol , Historical , Vintage , Ames , History , Center , Image , Maps , Places , Sites , Houses , Macris , Registry , National , Historic , Commission , Interior , People , Village , South , Main , Society , Museum , Station , Out , Door , Bay , House , Property , Town , District , Bridge , Washington , Shovel , Rail , Furnace , Botanical , Fence , Shop , Index , Wooster , Flower , Spring , Asahel , Park , Garden , Coe , Elementary , Road , Simpson , Revolutionary , Home , Wall , Pond , North , Governor , Site , Farm

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, Ames, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, Asahel, Bay, Botanical, bridge, Bristol, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Center, Coe, commission, Depot, District, door, Easton, Eastondale, Elementary, farm, Fence, flower, for woodworking crafts, for woodworking tool, Frank, Furnace, garden, Governor, guide to woodworking, HIstoric, historical, History, hobbies like woodworking, home, house, houses, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, image, Index, info, interior, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Macris, Main, Maps, Massachusetts, Museum, National, nk woodworking bathtub, North, oil can woodworking, Out, Park, people, Places, pond, Property, Rail, Randall, Registry, Revolutionary, Road, shop, Shovel, Simpson, Site, Sites, Society, South, spring, Station, STREET, Town, Village, vintage, Wall, Washington, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, Wooster, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Ironbridge the cradle of the Industrial Revolution

August 9, 2020 by 4g3nd4

The world’s first iron bridge was erected over the River Severn here in 1779. Britain’s best known industrial monument, the bridge gave its name to the spectacular wooded gorge which, though now tranquil, was once an industrial powerhouse and the cradle of the Industrial Revolution. Ironbridge Gorge is now a World Heritage Site.

At the beginning of the 18th century Abraham Darby 1st pioneered the process of using coke made from local coal to smelt local iron ore, but industrial expansion was hampered by the lack of a bridge over the Severn, which had to be a single-span to allow for barge traffic.

An iron bridge was first suggested by the Shrewsbury architect Thomas Pritchard who designed a single bridge span 30 metres long, but died as work began. The project was then taken over by Abraham Darby 3rd, who cast the bridge in his Coalbrookdale foundry, using 378 tons of iron.

Recent research shows that most parts were individually cast to fit, each being slightly different from the next: and that traditional woodworking-style joints were adapted to assemble them.

Costing over £6,000, this proclamation of the achievements of Shropshire ironmasters was formally opened on New Year’s Day 1781. It continued in full use by ever-increasing traffic until closed and designated an Ancient Monument in 1934. Massive strengthening works were later undertaken, and in 1999-2000 English Heritage assisted with a full survey of this revolutionary and iconic structure.

Thank you for looking at my photographs and for any comments it is much appreciated

Press L to view in Lightbox

www.jimroberts.co.uk

www.flickriver.com/photos/jimborobbo/popular-interesting/

© Jim Roberts JR’s Gallery

Posted by Jim Roberts Gallery on 2015-09-03 20:04:52

Tagged: , Ironbridge , Ironworks , Coalbrookdale , Industrial Revolution , River Severn , Abraham Darby , Landscape , Bridge , History , Flowers

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, Abraham Darby, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, bridge, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Coalbrookdale, cradle, flowers, for woodworking crafts, for woodworking tool, guide to woodworking, History, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, industrial, Industrial Revolution, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, Ironbridge, Ironworks, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, Landscape, nk woodworking bathtub, oil can woodworking, Revolution, River Severn, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

The Iron Bridge, Ironbridge

August 3, 2020 by 4g3nd4

The iron bridge in Ironbridge, completed 1779, photographed today to mark the visit of the We’re Here! group to the Old and Characteristic Buildings group.

Source: Wikipedia – The Iron Bridge crosses the River Severn at the Ironbridge Gorge, by the village of Ironbridge, in Shropshire, England. It was the first arch bridge in the world to be made out of cast iron, a material which was previously far too expensive to use for large structures. However, a new blast furnace nearby lowered the cost and so encouraged local engineers and architects to solve a long-standing problem of a crossing over the river.

In the early eighteenth century, the only way to cross the Severn Gorge was by ferry. However, the industries that were growing in the area of Coalbrookdale and Broseley needed a more reliable crossing.
In 1773, Thomas Farnolls Pritchard wrote to a local ironmaster, John Wilkinson of Broseley, to suggest building a bridge out of cast iron. By 1775, Pritchard had finalised the plans, but he died in December 1777, only a month after work had begun.
Abraham Darby III, who was the grandson of the first foundry owner and an ironmaster working at Coalbrookdale in the gorge, was commissioned to cast and build the bridge. The iron for the new bridge was cast at his foundry.
Shares were issued to raise the £3,200 required, and Darby agreed to fund any overspend. Although it had been predicted that 300 tons of iron would be needed (costing £7 a ton), in the end 379 tons were used, costing Darby and his company nearly £3,000. There would be many other costs to bear (masonry abutments, assembly, etc.), so that the project was far more expensive than first envisaged. Darby bore most of the cost over-run, and got into debt for the rest of his short life.
Being the first of its sort, the construction had no precedent; the method chosen to create the structure was therefore based on carpentry. Each member of the frame was cast separately, and fastenings followed those used in woodworking, such as the mortise and tenon and blind dovetail joints. Bolts were used to fasten the half-ribs together at the crown of the arch. Very large parts were needed to create a structure to span 100 feet rising to 60 feet above the river. The largest parts were the half-ribs, each about 70 ft long and weighing 5.25 tons. The bridge comprises more than 800 castings of 12 basic types.
The bridge was raised in the summer of 1779, and it was opened on New Year’s Day 1781. In 2001, the BBC screened a documentary in which a half-sized model of the bridge was built to test recent research over the construction. Instead of large timber towers, a pair of uprights with a crosspiece was used to erect each of the ribs in sequence. The abutments were built afterwards.

Posted by Mount Fuji Man on 2020-01-12 19:14:56

Tagged: , Ironbridge , bridge , WAH , Hereios , 366: The 2020 Edition , 366:2020 , Day 12/366 , 12-Jan-2020

Categories Uncategorized Tags 042 woodworking, 0ld woodworking tools, 10 000 woodworking plans, 12-Jan-2020, 16 000 woodworking plans, 16 000 woodworking plans and projects download, 16 000 woodworking plans pdf, 16 000 woodworking plans pdf free download, 366: The 2020 Edition, 366:2020, 57 woodworking plans, 5e woodworking tools, 6 woodworking jointer, 6 woodworking tips, 6 woodworking tips and tricks for beginners, 6 woodworking tips for beginners, 6 woodworking vise, 60 woodworking clamps, 6270 woodworking trimming machine flipboard, 6500 woodworking projects, 6x13 woodworking, 7 woodworking tools, 7 woodworking vise, 70s woodworking, 718 woodworking, 731 woodworking, 7m woodworking, 7m woodworking etsy, 8 woodworking tools, 8 woodworking vise, 800w woodworking electric trimming, 800w woodworking electric trimming machine, 8020 woodworking, 805 woodworking, 832 woodworking, 8x10 woodworking shop, 8x12 woodworking shop, 9 woodworking vise, 90° woodworking metric gauge, are grizzly woodworking tools good, are woodworking companies, are woodworking masks good for covid, are woodworking masks n95, bridge, can crusher woodworking blueprint, can crusher woodworking plans, can do woodworking, can i do woodworking in a storage unit, can woodworking be profitable, can woodworking make money, Day 12/366, for woodworking crafts, for woodworking tool, guide to woodworking, Hereios, hobbies like woodworking, how many amps for a woodworking shop, how many calories does woodworking burn, how many clamps for woodworking, how many dowels to use woodworking, how many types of wood joints, how many wood joints are there, how many woodworking joints are there, how much are old woodworking tools worth, how much can a woodworking business make, how much do woodworking classes cost, how much does a woodworking cnc machine cost, how much does a woodworking shop cost, how much does woodworking cost, how much is a woodworking machine, how much is a woodworking router, how much to start woodworking business, how to woodworking videos, how woodworking machinery, how woodworking routers work, how woodworking started, i like woodworking, i like woodworking youtube, intro to woodworking, intro to woodworking class, introduction to woodworking, introduction to woodworking pdf, Ironbridge, iron”, is woodworking a good hobby, is woodworking a trade, is woodworking an art, is woodworking bad for the environment, is woodworking carpentry, is woodworking dangerous, is woodworking expensive, is woodworking hard, is woodworking one word, is woodworking profitable, nk woodworking bathtub, oil can woodworking, WAH, what are the different types of wood joints, what are woodworking hand tools, what are woodworking joints, what are woodworking routers used for, what are woodworking tools, what is the strongest woodworking joint, what woodworking chisels do i need, what woodworking clamps do i need, what woodworking items sell the best, what woodworking planes do i need, what woodworking projects sell, what woodworking router should i buy, what woodworking router to buy, what woodworking tools are made in the usa, what woodworking tools do i need, what woodworking tools should i buy first, when did woodworking begin, when is the woodworking show in columbus ohio, when to sand woodworking, when to use woodworking glue, when we crosswords woodworking basics, when were woodworking invented, when were woodworking tools invented, where did woodworking originate, where do woodworking, where is woodworking bench sims freeplay, where to woodworking tools, which woodworking clamps, which woodworking joint to use, which woodworking magazine, which woodworking router, which woodworking router is best, which woodworking router should i buy, which woodworking router to buy, which woodworking tools to buy first, which woodworking vise, who buys old woodworking tools, who buys used woodworking equipment, who buys used woodworking machinery, who does woodworking, who invented woodworking, who makes jet woodworking tools, who makes woodworking tools, who owns rockler woodworking, who sells woodworking tools, who started woodworking, why are woodworking pencils flat, why are woodworking planes so expensive, why do woodworking, why is woodworking so expensive, why is woodworking so hard, why knot woodworking, why learn woodworking, why not woodworking, why woodworking is good for you, why woodworking is important, will larue woodworking, will matthews woodworking, will myers woodworking, will myers woodworking blog, will myers woodworking classes, will neptune woodworking, will sampson woodworking, will siblings woodworking, will walker woodworking, will's woodworking, woodworking, woodworking 018, woodworking 02188, woodworking 03079, woodworking 101, woodworking 101 book, woodworking 101 common woodworking joinery, woodworking 101 free online courses, woodworking 101 pdf, woodworking 101 podcast, woodworking 101 projects, woodworking 101 reddit, woodworking 101 tools, woodworking 101 youtube, woodworking 2, woodworking 2 by 4, woodworking 2 eso, woodworking 2 part epoxy, woodworking 2 sided tape, woodworking 2019, woodworking 2020, woodworking 24/7, woodworking 2x4 challenge, woodworking 2x4 projects, woodworking 3 way joint, woodworking 3d, woodworking 3d design, woodworking 3d game, woodworking 3d modeling free, woodworking 3d print files, woodworking 3d printed tools, woodworking 3d printer, woodworking 3d prints, woodworking 3d software, woodworking 4 h projects, woodworking 4 home, woodworking 4 inventor, woodworking 40 under 40, woodworking 45 degree, woodworking 45 degree angle, woodworking 45 degree cut, woodworking 45 degree joint, woodworking 4h, woodworking 4th edition, woodworking 5 axis, woodworking 5 axis cnc, woodworking 5 cut method, woodworking 5 in 1 machine, woodworking 5 steps, woodworking 502, woodworking 55105, woodworking 5e, woodworking 6 clamps, woodworking 78, woodworking 80112, woodworking 90 degree, woodworking 90 degree angle, woodworking 90 degree clamp, woodworking 90 degree jig, woodworking 90 degree joint, woodworking 90 degree right angle clamp, woodworking 90 degree square, woodworking 92111, woodworking accessories, woodworking adalah, woodworking and 3d printing, woodworking and cancer, woodworking and carpentry, woodworking and design, woodworking and epoxy, woodworking and gardening tools, woodworking and hardware, woodworking and hardware stores near me, woodworking and joinery, woodworking and math, woodworking and painting in faith youtube, woodworking and welding, woodworking angle tool, woodworking apprenticeship, woodworking apps, woodworking apron, woodworking are best, woodworking art, woodworking articles, woodworking assembly table, woodworking auctions, woodworking basics, woodworking bench, woodworking bench plans, woodworking bench the sims freeplay, woodworking bench vise, woodworking book pdf, woodworking books, woodworking branding iron, woodworking business, woodworking business names, woodworking can crusher, woodworking can holder, woodworking can storage, woodworking careers, woodworking chisels, woodworking clamps, woodworking classes, woodworking classes online, woodworking cnc, woodworking company, woodworking compass, woodworking corner clamps, woodworking courses, woodworking definition, woodworking design software, woodworking design software free, woodworking designs, woodworking desk plans, woodworking diy, woodworking drill bits, woodworking dust collection, woodworking dust extractor, woodworking dust mask, woodworking ear protection, woodworking edmonton, woodworking electric trimmer 800w, woodworking enthusiasts, woodworking epoxy, woodworking equipment, woodworking equipment auction, woodworking equipment for sale, woodworking eso, woodworking essentials, woodworking face mask, woodworking face shield, woodworking files, woodworking for beginners, woodworking for dummies, woodworking for dummies pdf, woodworking for engineers, woodworking for inventor, woodworking for kids, woodworking for mere mortals, woodworking for mere mortals plans, woodworking for mere mortals tool list, woodworking forum, woodworking furniture, woodworking furniture plans, woodworking gadgets, woodworking gift ideas, woodworking gifts, woodworking gifts for mom, woodworking glasses, woodworking gloves, woodworking glue, woodworking goggles, woodworking guide, woodworking guild of america, woodworking hacks, woodworking hand saws, woodworking hand tools, woodworking hardware, woodworking hashtags, woodworking hawaii, woodworking hobby, woodworking hobby sims freeplay, woodworking holdfast, woodworking horse, woodworking how many clamps reddit, woodworking how to cut a perfect circle, woodworking how to get started, woodworking how to make a box, woodworking how to make a picture frame, woodworking how to make a pyramid, woodworking how to measure angles, woodworking how to videos, woodworking ideas, woodworking ideas easy, woodworking ideas for kids, woodworking ideas to sell, woodworking images, woodworking in an apartment, woodworking indonesia, woodworking industry, woodworking inlay, woodworking instagram, woodworking jakarta, woodworking jig, woodworking jigsaw, woodworking job 7 little words, woodworking jobs, woodworking jobs near me, woodworking joint types, woodworking jointer, woodworking joints, woodworking jokes, woodworking journal, woodworking kids, woodworking kit for beginners, woodworking kitchen table, woodworking kits, woodworking kits for kids, woodworking kits for teens, woodworking kits uk, woodworking knife, woodworking knowledge poster, woodworking knoxville, woodworking las vegas, woodworking lathe, woodworking lathe for sale, woodworking lathe is the type of, woodworking lathe tools, woodworking layout tools, woodworking lessons, woodworking lessons near me, woodworking logo, woodworking lumber, woodworking machine, woodworking machinery, woodworking machinery indonesia, woodworking machines for sale, woodworking magazine, woodworking mallet, woodworking mask, woodworking masterclass, woodworking measuring tools, woodworking merit badge, woodworking n95 mask, woodworking naics code, woodworking nail gun, woodworking nails, woodworking names, woodworking near, woodworking near asheville nc, woodworking near canandaigua ny, woodworking near furnace, woodworking near huntington wv, woodworking near me, woodworking near me class, woodworking near my location, woodworking near pittsfield ma, woodworking near plainfield il, woodworking network, woodworking news, woodworking nightstand, woodworking nz, woodworking okc, woodworking omaha, woodworking on youtube, woodworking online, woodworking online course, woodworking online store, woodworking or carpentry, woodworking or woodworking, woodworking organization, woodworking ottawa, woodworking outdoor furniture, woodworking overalls, woodworking pdf, woodworking pemula, woodworking plans, woodworking plans app, woodworking plans for beginners, woodworking plans pdf, woodworking power tools, woodworking projects, woodworking projects for kids, woodworking projects pdf, woodworking quad cities, woodworking queen bed plans, woodworking questions, woodworking quick clamps, woodworking quick release vise, woodworking quiz, woodworking quiz questions, woodworking quizlet, woodworking quote template, woodworking quotes, woodworking rabbet, woodworking rasp, woodworking reddit, woodworking resin, woodworking respirator, woodworking router, woodworking router bits, woodworking router reviews, woodworking router table, woodworking ruler, woodworking school, woodworking shop, woodworking shop near me, woodworking sims 4, woodworking sims freeplay, woodworking software, woodworking store, woodworking store near me, woodworking supplies, woodworking surabaya, woodworking table, woodworking table sims 4, woodworking the sims freeplay, woodworking to carpentry, woodworking to make extra money, woodworking to make money, woodworking to sell, woodworking tool 7 letters, woodworking tools, woodworking tools for beginners, woodworking tools for sale, woodworking tools indonesia, woodworking tools list, woodworking tools near me, woodworking tutorial, woodworking udemy, woodworking uk, woodworking uk forum, woodworking union, woodworking university, woodworking unlimited, woodworking urn, woodworking usa, woodworking utah, woodworking vacuum, woodworking vacuum bag, woodworking vancouver, woodworking vest, woodworking videos, woodworking vise, woodworking vise diy, woodworking vise reviews, woodworking vise uk, woodworking vs wood carving, woodworking vs woodcraft, woodworking websites, woodworking when do you sand, woodworking when pregnant, woodworking when you live in an apartment, woodworking where to buy planes, woodworking where to find bamboo, woodworking where to find lumber, woodworking where to get plywood, woodworking where to start, woodworking where to start reddit, woodworking winnipeg, woodworking with ash, woodworking with bamboo, woodworking with cedar, woodworking with dremel, woodworking with electricity, woodworking with epoxy, woodworking with hand tools, woodworking with hand tools only, woodworking with pallets, woodworking with resin, woodworking without a bench, woodworking without a jointer, woodworking without a planer, woodworking without a shop, woodworking without a table saw, woodworking without a vise, woodworking without a workbench, woodworking without a workshop, woodworking without nails, woodworking without power tools, woodworking wood, woodworking wood for sale, woodworking workbench, woodworking workbench plans, woodworking workshop, woodworking workshop near me, woodworking x carve, woodworking x joint, woodworking xmas gifts, woodworking xmas plans, woodworking xmas projects, woodworking yakima, woodworking yard games, woodworking yard projects, woodworking york pa, woodworking youtube, woodworking youtube channels, woodworking youtube channels reddit, woodworking youtube uk, woodworking yuma az, woodworking z chair, woodworking z clips, woodworking zanesville, woodworking zealand, woodworking zeeland mi, woodworking zero gravity chair, woodworking zip up hoodies, woodworking zoo, woodworking zoom, woodworking zurich, xcalibur woodworking machinery, xfactory woodworking, xfactory woodworking machinery, xfasten woodworking tape, xtreme woodworking Leave a comment

Archives

  • February 2021
  • January 2021
  • December 2020
  • November 2020
  • October 2020
  • September 2020
  • August 2020
  • July 2020
  • June 2020
  • May 2020
  • April 2020
  • March 2020
  • February 2020
  • January 2020
  • December 2019
  • November 2019
  • October 2019
  • September 2019
  • August 2019
© 2021 Kitchen Inspiration • Built with GeneratePress